Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Wood EMC Chart
« previous
next »
Print
Pages: [
1
]
Author
Topic: Wood EMC Chart (Read 3010 times)
0 Members and 1 Guest are viewing this topic.
Greebe
Member
Posts: 88
Wood EMC Chart
«
on:
January 04, 2015, 03:39:57 pm »
Hey guys and gals,
I was looking around for a chart to tell me the moisture content of wood when making bows. I found this one that can be downloaded as a pdf and printed. It tells you the moisture content of wood based on the air temp and humidity.
https://www.finewoodworking.com/FWNPDFfree/equilibrium-moisture-content-chart.pdf
Hope that helps someone.
Greebe
Logged
wizardgoat
Member
Posts: 2,397
Re: Wood EMC Chart
«
Reply #1 on:
January 04, 2015, 07:50:22 pm »
Just use a kitchen scale to see moisture content. Here in the wet PNW wet wood is no joke
Logged
Greebe
Member
Posts: 88
Re: Wood EMC Chart
«
Reply #2 on:
January 04, 2015, 10:02:19 pm »
How would a kitchen scale give you the moisture content?
Logged
wizardgoat
Member
Posts: 2,397
Re: Wood EMC Chart
«
Reply #3 on:
January 05, 2015, 03:03:13 am »
because moisture content is physical weight that can be measured.
If I had 2 staves sitting in the corner, one cut a year ago one cut last week,
would the chart tell me it's the same moisture content in each stave?
Logged
mikekeswick
Guest
Re: Wood EMC Chart
«
Reply #4 on:
January 05, 2015, 03:52:39 am »
Cut a scrap piece of the wood you are going to be working on.
Weigh it accurately.
Dry it completely in an oven till it loses no more weight.
A bit of maths and the two readings will give you a definite m.c. reading.
Just weighing them will only tell you if it's still losing weight. (still heading for E.M.C.)
If it's losing weight it's due to it trying to get to E.M.C. which is what the chart tells you.
The chart DOES NOT tell you what moisture content the wood is....it tells you what it's heading for IF nothing changes with the temp and the relative humidity.
Logged
Will H
Member
Posts: 2,120
Re: Wood EMC Chart
«
Reply #5 on:
January 05, 2015, 07:56:38 am »
This chart is a great help. Been using it for years. It wont tell you the exact MC of a full stave nessisarily but that's not really that important to me. But used in conjunction with a kitchen scale it will tell you MC pretty accurately.
Take a roughly floor tillered bow blank that's been sitting outside and has lots of moisture. Weigh it and take it inside for the next few weeks. Weigh it again every few days. When it stops loosing weigh for 1/3 of the time it's been drying it has equalized to its environment.
Now assuming it's been in a stable environment your chart will tell you approximately what the MC in your bow blank is. Not where its heading or where it's been even just where it is.
Logged
Proud Member of Twin Oaks Bowhunters
Clarksville, Tennessee
"Middle Tennessee is the place to be"
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Wood EMC Chart