« previous next »
Pages: 1 ... 4 5 [6] 7 8 ... 15

Author Topic: K.I.T.H  (Read 47716 times)

0 Members and 1 Guest are viewing this topic.

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: K.I.T.H
« Reply #75 on: January 15, 2015, 11:54:14 pm »
Hey rick we have the same display counter it seems
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline Rick Wallace

  • Member
  • Posts: 766
Re: K.I.T.H
« Reply #76 on: January 16, 2015, 08:19:03 am »
Quote from: NeolithicMan on January 15, 2015, 11:54:14 pm
Hey rick we have the same display counter it seems
  :)  How about that!  That's the professional grade kitchen counter display  ;)
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: K.I.T.H
« Reply #77 on: January 16, 2015, 09:11:09 am »
Sorry to hear about your wife Rick. I have been going through about the same. That is why mine was finished so quickly. Trying to keep my mind in other places. John, I still haven't sent it. Plowing snow and all nighters in the ER have made my brain a little mushy.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Rick Wallace

  • Member
  • Posts: 766
Re: K.I.T.H
« Reply #78 on: January 16, 2015, 10:01:12 am »
Thanks Jo  She had a total knee replacement,shes fine just lots of Physical therapy to do.
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline KHalverson

  • Member
  • Posts: 758
Re: K.I.T.H
« Reply #79 on: January 16, 2015, 07:10:21 pm »
OK
I have my blade finished forged with dual hammered finger guards as well as a tapered tang.
I forged close to finished shape  so only a couple minutes on the belt sander was required  to get the profile where it is at now.
gonna finish at right around 7 3/4 o.a.l.
time to drill the pin holes  set the bevels and flatten the tang.
I hope jo5h approves.
Kevin

Logged

Offline Tyke

  • Member
  • Posts: 343
Re: K.I.T.H
« Reply #80 on: January 16, 2015, 07:23:02 pm »
Cant wait to see what wizard goat comes up with  :o
Logged
why buy it when you can build it

Offline J05H

  • Member
  • Posts: 478
Re: K.I.T.H
« Reply #81 on: January 16, 2015, 07:32:17 pm »
Its looking good! I definitely approve!
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: K.I.T.H
« Reply #82 on: January 16, 2015, 08:19:52 pm »
Absolutely no rush jojo, I am excited to get the knife but I can wait as long as you need.

I didnt get anything done today, shot a doe this morning and thats keeps me busy for the day.
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline Rick Wallace

  • Member
  • Posts: 766
Re: K.I.T.H
« Reply #83 on: January 17, 2015, 06:59:58 pm »
98% done.  A little polish, final sharpening. scabbards have been dyed,and are drying.  Dont know which one to send. Might just make another instead,Got to have a little suspense   ;) 
 
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline Rick Wallace

  • Member
  • Posts: 766
Re: K.I.T.H
« Reply #84 on: January 20, 2015, 10:59:42 pm »
You guys sure do talk alot ,, :o  Well its complete. Still not sure of which one to send,but here ya go.Fillet knife,old 12" sawblade,heat treated and gun blued.Will shave hair off a frog.

with rawhide sheath

Skinner,Forged out of an old file,I left some file and hammer marks in it,Sharp enough to skin a buffalo.

With rawhide scabbard

And then there is this,,Just because I wanted to trow it in the box   ;)

Hope you get some use out of these Mr Jo Jo.   8)
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline Tyke

  • Member
  • Posts: 343
Re: K.I.T.H
« Reply #85 on: January 21, 2015, 12:58:27 pm »
Mark me as shipped
Logged
why buy it when you can build it

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: K.I.T.H
« Reply #86 on: January 21, 2015, 02:39:21 pm »
Got this made outta a road saw, Kevin is gonna help with with hardening it once he figures out the cycle from the scraps I'm sending him. What yall think? It's about 6-7" long
Logged
Nothing ventured nothing gained

Offline Rick Wallace

  • Member
  • Posts: 766
Re: K.I.T.H
« Reply #87 on: January 21, 2015, 03:39:18 pm »
Nice!  Thats a good design,good EDC knife.
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: K.I.T.H
« Reply #88 on: January 21, 2015, 03:50:32 pm »
I got another in the works as well, dunno which is going
Logged
Nothing ventured nothing gained

Offline KHalverson

  • Member
  • Posts: 758
Re: K.I.T.H
« Reply #89 on: January 21, 2015, 04:48:59 pm »
Bruce
looks very nice to me.
Logged
Pages: 1 ... 4 5 [6] 7 8 ... 15
« previous next »