Problem with laminated hungary bow

[adb]

Any pics of the crack?
I don' t think ipe/maple mix to be a great choice.
Michael

Do you mean just in this case, or in general?

[bubby]

Any pics of the crack?
I don' t think ipe/maple mix to be a great choice.
Michael





I don't know, I've had good results with this combo

[PatM]

  If you push the reflex too far with Maple/Ipe the Ipe WILL tear the Maple in half, even under sinew.

[kamil2910]

I today scrap a belly of bow, I go to at that moment 3-2 mm ipe, to 9 mm thin arm,
I make wrap at the grip end place, bend and already be good, Tomorrow I go to strung thys bow

[adb]

Any pics of the crack?
I don' t think ipe/maple mix to be a great choice.
Michael





I don't know, I've had good results with this combo

Yah, me too. Maple and ipe has been a great combo for me. Warbows, flatbows and static recurved. I haven't used it in a highly reflexed or highly stressed design like this, but it's done everything else I've asked of it.

[bubby]

  If you push the reflex too far with Maple/Ipe the Ipe WILL tear the Maple in half, even under sinew.





Push any wood to far and you will tear it apart

[PatM]

  If you push the reflex too far with Maple/Ipe the Ipe WILL tear the Maple in half, even under sinew.





Push any wood to far and you will tear it apart

Some of them just crush and lose spring without tearing apart....

[kamil2910]

Today I go to tepelik bending, I make litlee more bend tepelik, and thys is photo bending arm,
No crack and delamination,
Bow go to 60-70 lbs draw weight

[Blaflair2]

Why r u putting deflex into it?

[kamil2910]

Thys is no deflex putt, thys is traditional methody hornbow tylering

[PatM]

He's just getting it bending.

[PatM]

Any updates? The siyah grain configuration looks a bit ominous...

[kamil2910]

Hi
Thys is a litlee udpade, litlee tiller and photo, the sijah grain be good,

[kamil2910]

I go to tiller, and its go to good
, by limb go twist and I must heat bend

[PatM]

Certainly looks the part. I wouldn't heat it much. Probably you would be able to manually twist the limb to straighten it and train it to be more in line.