« previous next »
Pages: [1]

Author Topic: What do you use to sinew back?  (Read 2979 times)

0 Members and 1 Guest are viewing this topic.

Offline adams89

  • Member
  • Posts: 205
What do you use to sinew back?
« on: December 16, 2014, 08:57:23 am »
I have backed every bow so far with hide glue , but I heard it's possible to do it with titebond or other woodglues and it would be more weather resistent.

I would love to hear some of your experiences

Thanks a lot

Johannes
Germany
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What do you use to sinew back?
« Reply #1 on: December 16, 2014, 09:32:43 am »
Johannes, Titebond glues are compatible with sinew and some folks prefer it but you don't get the full potential from the sinew if you use TB glues. I like the old fashioned, tried and true hide glue if I'm gonna build a sinew backed bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline adams89

  • Member
  • Posts: 205
Re: What do you use to sinew back?
« Reply #2 on: December 16, 2014, 09:43:28 am »
Thank you Pat. Great to her some of your experience.! :)
Logged

Stringman

  • Guest
Re: What do you use to sinew back?
« Reply #3 on: December 16, 2014, 09:55:10 am »
I would take Pats advise to the bank.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: What do you use to sinew back?
« Reply #4 on: December 16, 2014, 10:28:39 am »
Hide glue every time for me.
Logged
I started out with nothin' and I still got most of it left

Offline adams89

  • Member
  • Posts: 205
Re: What do you use to sinew back?
« Reply #5 on: December 16, 2014, 10:52:31 am »
OK. I thought about experimenting with normal woodglue, but I guess I'll leave it and use the good old hide glue. thank you everyone for your advice! :D
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: What do you use to sinew back?
« Reply #6 on: December 16, 2014, 10:55:24 am »
My thoughts on the glue question are this:

Sinew + hide glue = performance enhancing backing (if the bow is designed and built for sinew)
Sinew + TB glue = protective backing similar to rawhide.
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What do you use to sinew back?
« Reply #7 on: December 16, 2014, 10:57:56 am »
I agree, Clint.  I have used TBIII on the last of 3 sinew layers (first 2 with hide glue) or just a thin coat of TBIII over sinew as a vapor barrier with good results.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Poggins

  • Member
  • Posts: 467
Re: What do you use to sinew back?
« Reply #8 on: December 16, 2014, 11:41:11 am »
Guess its bacicly hide glue , Knox gelliton , according to TBB it's a little stronger than regular hide glue .
Logged

Offline duke3192

  • Member
  • Posts: 195
  • pm109331
Re: What do you use to sinew back?
« Reply #9 on: December 16, 2014, 08:05:43 pm »
how strong do you mix hide glue, or what viscosity, surface tension, I've really been experimenting lately.
Logged
charter member of traditional bow hunters of Florida.

Offline Eric Garza

  • Member
  • Posts: 589
Re: What do you use to sinew back?
« Reply #10 on: December 16, 2014, 08:07:43 pm »
I use hide glue with sinew to get the most from the sinew. I do use Titebond III with rawhide though.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What do you use to sinew back?
« Reply #11 on: December 16, 2014, 08:43:34 pm »
Duke, make the hide glue the consistency as syrup.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: What do you use to sinew back?
« Reply #12 on: December 17, 2014, 12:18:12 am »
Hide glue is much better, tightbond takes forever to cure.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: What do you use to sinew back?
« Reply #13 on: December 17, 2014, 12:31:37 am »
Titebond does take a long time to cure.  Thin layers are best and not too bad, in my experience.  I use a blow dryer or heat gun to speed the drying just after I lay it down... and wrap the bow tightly to keep the sinew from raising up here and there and separating from the wood.  The same thing happens with hide glue (the separating) but it's easier to deal with hide glue.  You can add water and wrap it down again if it separates.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline adams89

  • Member
  • Posts: 205
Re: What do you use to sinew back?
« Reply #14 on: December 17, 2014, 07:13:28 am »
thank you everybody on here, it's great to put a question on this board and all the woodscientist collect their answers, so everybody gets something out of it

thanks again.! :D
Logged
Pages: [1]
« previous next »