« previous next »
Pages: [1]

Author Topic: Cherry sapwood question.  (Read 1940 times)

0 Members and 1 Guest are viewing this topic.

Offline Tommytinker

  • Member
  • Posts: 76
Cherry sapwood question.
« on: November 30, 2014, 12:01:12 pm »
Am I correct in saying when chasing a ring in cherry sapwood I'm after the lighter colour wood?
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Cherry sapwood question.
« Reply #1 on: November 30, 2014, 01:26:34 pm »
yes
Logged
Simon
Bavaria, Germany

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Cherry sapwood question.
« Reply #2 on: November 30, 2014, 02:59:59 pm »
  Yes, the spring growth is darker than the summer rings.  How come you are chasing a ring in cherry?  Just curious, interested......
Logged

Offline Tommytinker

  • Member
  • Posts: 76
Re: Cherry sapwood question.
« Reply #3 on: November 30, 2014, 05:59:17 pm »
I thought it would be preferable to have a continuous ring on the back... Not necessary with cherry sapwood?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Cherry sapwood question.
« Reply #4 on: December 01, 2014, 03:11:40 pm »
One ring is always good on any wood. Continue chasing buddy! Its best to cut in the spring and peel the bark off clean to a back, but we don't all have that liberty.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Cherry sapwood question.
« Reply #5 on: December 01, 2014, 03:39:41 pm »
  You are totally right that one ring is best.  I guess I assumed you had a stave from a tree, and I thought that the ring under that the bark was right there for you.  If you are chasing a ring in lumber, then by all means proceed.  You are correct.
Logged
Pages: [1]
« previous next »