« previous next »
Pages: [1] 2

Author Topic: Bow weight  (Read 3337 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Bow weight
« on: November 17, 2014, 07:36:18 pm »
I'am trying to figure out exactly the draw weight without going out and spending money.  I think my bathroom scale is accurate but any way.  If my bow is pulling 30# @ 22"  about what would it be around 28"  .. What is the average weight increase for every inch.   Is it 3-5#........ ::)
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Bow weight
« Reply #1 on: November 17, 2014, 07:39:27 pm »
Is it a finished bow?  Bcause if not, it will change things.  Check your scale with something you know the weight of, such as two gallons of milk.  Then if it is close, fill a bucket with water or rocks to whatever weight you want, hook the string on the bucket and lift the bow handle.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow weight
« Reply #2 on: November 17, 2014, 07:55:22 pm »
Generally 3# per inch but that is not cut in stone.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bow101

  • Member
  • Posts: 2,235
Re: Bow weight
« Reply #3 on: November 17, 2014, 08:05:15 pm »
Quote from: Springbuck on November 17, 2014, 07:39:27 pm
Is it a finished bow?  Bcause if not, it will change things.  Check your scale with something you know the weight of, such as two gallons of milk.  Then if it is close, fill a bucket with water or rocks to whatever weight you want, hook the string on the bucket and lift the bow handle.

Its been done for the last 2 months.  I calibrated the scale with me on it @ 190#. Dry and clean.   ;D  The bow lifted the 27# dumbell at 22".........

Quote from: Pat B on November 17, 2014, 07:55:22 pm
Generally 3# per inch but that is not cut in stone.

I have to get back to you on that one.  I thought 3# per inch is a little on the low side especially after getting to full draw.  When I do it on the scale I'm getting about 56# @ 28"
« Last Edit: November 17, 2014, 08:34:25 pm by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Bow weight
« Reply #4 on: November 17, 2014, 08:33:42 pm »
Stand a board on end on your scale. Place handle of bow on end of board and push the string down to the full draw mark you put on the board. Read the scale and then subtract the weigjt of the bow and board.
Logged
Steve Bennett

Offline Tyke

  • Member
  • Posts: 343
Re: Bow weight
« Reply #5 on: November 17, 2014, 08:39:30 pm »
Liquids weigh 8lbs a gallon
Logged
why buy it when you can build it

Offline Jim Davis

  • Member
  • Posts: 1,351
  • Reparrows
    • Reparrows
Re: Bow weight
« Reply #6 on: November 17, 2014, 09:41:18 pm »
Quote from: Tyke on November 17, 2014, 08:39:30 pm
Liquids weigh 8lbs a gallon

WATER weighs 8 lbs per gallon. A gallon of Milk about 8.6 lbs. A gallon of vegetable oil weighs about 7.64 lbs. ---just for the record.
Logged
Jim Davis

Kentucky--formerly Maine

Offline bow101

  • Member
  • Posts: 2,235
Re: Bow weight
« Reply #7 on: November 17, 2014, 10:11:52 pm »
Look for some weights at the thrift shop  I guess and get this issue straightened out once and for all.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Drewster

  • Member
  • Posts: 687
Re: Bow weight
« Reply #8 on: November 17, 2014, 10:15:06 pm »
Water weights 8.34 lbs/gallon if you want to be precise.  I agree with Pat on the draw weight per inch.  Most bows I've checked are 2 1/2 to 3 lbs per inch of draw weight.  Yeah, check your scales and be consistent with your testing.
Logged
Drew - Boone, NC

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Bow weight
« Reply #9 on: November 17, 2014, 10:53:59 pm »
I got a little digi scale from a big wood tool store for 20$
Much less scary than the bathroom scale method.
I know you said you don't want to spend money, but for me
it was money well spent.
And I can monitor the draw weight through the entire tillering process
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow weight
« Reply #10 on: November 17, 2014, 11:58:21 pm »
The actual draw weight shouldn't matter if you are building for yourself. Just make the bow comfortable for you to shoot.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: Bow weight
« Reply #11 on: November 17, 2014, 11:59:42 pm »
Quote from: Pat B on November 17, 2014, 11:58:21 pm
The actual draw weight shouldn't matter if you are building for yourself. Just make the bow comfortable for you to shoot.

How is that for sheer practicality?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Bow weight
« Reply #12 on: November 18, 2014, 12:01:45 am »
...and cheap too!   ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: Bow weight
« Reply #13 on: November 18, 2014, 05:27:28 am »
What Pat said. ;) :) and 3lbs per. inch is usually pretty close. :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Bow weight
« Reply #14 on: November 18, 2014, 05:40:47 pm »
most bows back in the day when used to make a living,, were not weighed 
Logged
Pages: [1] 2
« previous next »