« previous next »
Pages: [1]

Author Topic: Reducing draw weight  (Read 3379 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Reducing draw weight
« on: November 16, 2014, 08:51:35 pm »
 I'm happy with the tiller but want to shed a few pounds. Do I take equal scrapes the full length of the limb or do I go a little lighter as I approach the tips?
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Reducing draw weight
« Reply #1 on: November 16, 2014, 09:01:36 pm »
If the tiller is dead on, scrape the whole limbs. If also reduced width with some success.
go slow, pounds can be shed pretty quick
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Reducing draw weight
« Reply #2 on: November 16, 2014, 11:43:26 pm »
Take 5 long, even scrapes on both limbs, exercise well and check the weight and tiller. Repeat until you get the draw weight you are looking for.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Reducing draw weight
« Reply #3 on: November 17, 2014, 12:40:13 am »
Why? Are you 5# over target? Need more info.  Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline DC

  • Member
  • Posts: 10,396
Re: Reducing draw weight
« Reply #4 on: November 17, 2014, 12:46:38 am »
I have to shoot it for a while to make sure but it looks about 5 or so pounds heavy.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Reducing draw weight
« Reply #5 on: November 17, 2014, 12:49:31 am »
Shoot it awhile, you will lose a few # most likely
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »