« previous next »
Pages: [1]

Author Topic: Working on an elm and erc longbow  (Read 2153 times)

0 Members and 1 Guest are viewing this topic.

Offline GB

  • Member
  • Posts: 519
Working on an elm and erc longbow
« on: November 09, 2014, 03:19:37 am »
I'm doing the final tillering on my first ERC bow.  I found a nice board that I was able to get a mostly heartwood, knot free slat from and backed it with 1/8" thick edge grained red elm.  It's 68" long, 1 5/8" at the fades and 45#@ my 27" draw.  I glued in 3" of reflex and it's holding 2 1/4" of it after putting 50 arrows thru it.  Thinking that I might have the very outer limbs a little too stiff yet.  Any body else seeing that?
Thanks-
Greg






 
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Working on an elm and erc longbow
« Reply #1 on: November 09, 2014, 07:56:01 am »
That looks very good GB.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bushboy

  • Member
  • Posts: 2,256
Re: Working on an elm and erc longbow
« Reply #2 on: November 09, 2014, 10:17:17 am »
looks great to me,nice job!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Working on an elm and erc longbow
« Reply #3 on: November 09, 2014, 11:09:49 am »
Nice job man.  The unbraced profile looks real nice.
Logged

Offline GB

  • Member
  • Posts: 519
Re: Working on an elm and erc longbow
« Reply #4 on: November 09, 2014, 02:48:37 pm »
Thanks for the encouraging words, guys.  Guess I'll do the final sanding and shoot it a little more.  Getting antsy to finish it now. :)
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Working on an elm and erc longbow
« Reply #5 on: November 09, 2014, 02:54:40 pm »
Since you have reached your draw length, further tillering will only reduce the draw weight and make a longer draw possible-neither of which would help you.

If you needed to go  to 28", the outer limbs could bend more, but, as I said...

Jim Davis
Logged
Jim Davis

Kentucky--formerly Maine

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Working on an elm and erc longbow
« Reply #6 on: November 09, 2014, 07:08:51 pm »
It's the lower limb that could bend a bit more in the outer limb but I agree with Jim, best to just leave it
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline GB

  • Member
  • Posts: 519
Re: Working on an elm and erc longbow
« Reply #7 on: November 10, 2014, 02:29:04 am »
Thanks for the advice Jim and Marc.  I'm happy with the way it shoots so I guess I'll just leave it as is.  I really liked the backed ERC bow that you made for the article in PA magazine awhile back, Marc.  In fact, that's what prompted me to give ERC a try.
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.
Pages: [1]
« previous next »