Author Topic: Getting ready to Tiller--3 Questions  (Read 9371 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
Re: Getting ready to Tiller--3 Questions
« Reply #30 on: December 11, 2014, 01:02:30 am »
it sounds like it's bending to much in the handle/fades area, get the limbs bending in a even arc with that tool before you go farther
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Comancheria

  • Member
  • Posts: 227
Re: Getting ready to Tiller--3 Questions
« Reply #31 on: December 11, 2014, 01:31:47 am »
Will do, and sorry to put you on the spot with no pictures.  Can't say how much I appreciate the guidance--of you and others.

Russ
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Getting ready to Tiller--3 Questions
« Reply #32 on: December 13, 2014, 12:08:33 pm »
  Yeah, don't exercise the bow until you like the tiller, but you are way under your target at 21 lbs/15"  If you can pull it 15", fer heck sakes, get that long string off it and get a real string on!  The long string is only for the first few inches.

If you want a 40 lb b ow, just don't pull it more than either: enough bend to see what needs correction, OR more than final draw weight.

It sounds like it is bending all at the inner limbs.  You need to spread the strain as much as possible.  If it bends mostly at the inner limb, and not the midlimb, it will take set at the inner limb.  That is the worst place to have set, because a little there affects the tips a lot.  So, leave the inner limbs alone, and chase that inner limb bend out along the limbs to the middle section.  The only place you want stiffness is the tips, maybe a thumb to pinkie spread length on a 70" bow.

Offline Eric Krewson

  • Member
  • Posts: 5,434
Re: Getting ready to Tiller--3 Questions
« Reply #33 on: December 13, 2014, 12:47:45 pm »
Here is how to make a proper tillering gizmo, the pencil marks much better than a metal screw.

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=125;t=001047;p=0#000000

Offline Comancheria

  • Member
  • Posts: 227
Re: Getting ready to Tiller--3 Questions
« Reply #34 on: December 13, 2014, 09:56:13 pm »
Sorry--did not see the replies on this before posting the new thread describing the disaster.  As Bubby said--and you empjasized, Sprimgbuck--that is exactly what happened. Lesson learned!

And thanks, Eric.

Russ
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!