« previous next »
Pages: 1 [2]

Author Topic: Short R/D  (Read 6099 times)

0 Members and 1 Guest are viewing this topic.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Short R/D
« Reply #15 on: November 05, 2014, 09:34:47 pm »
Thanks everybody ;D

Just tested penetration with my first broadhead glued into the snapped end of a bamboo arrow, no idea what a pass through around ten pairs of jeans in a cardboard box means but it certainly seems adiquate!
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Short R/D
« Reply #16 on: November 05, 2014, 09:38:49 pm »
Sweet little locust bow, hope you nail something with it. :)
Logged
I ain't broke but I'm badly bent.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Short R/D
« Reply #17 on: November 05, 2014, 11:00:02 pm »
Nice work mark.  I have a BL bow with cryshals all olong one limb.  This might have inspired me to put a finish on her.  How long would you recon your bow will hold up?
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Short R/D
« Reply #18 on: November 06, 2014, 12:07:08 am »
It's past 200 and has managed to only take a standard two inches of set. I don't expect it to last as long as other/wider bows with as much set, but it could get close to a thousand I think- though I might retire her at five hundred for my sake ::)
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

mikekeswick

  • Guest
Re: Short R/D
« Reply #19 on: November 06, 2014, 02:58:03 am »
Great shorty bow :)
Matt if your bow has chrsyals along one limb then the other is too strong before you finish it take some scraps off the strong limb.
Logged
Pages: 1 [2]
« previous next »