Author Topic: My first successful bow!  (Read 5225 times)

0 Members and 1 Guest are viewing this topic.

Offline dueb

  • Member
  • Posts: 79
My first successful bow!
« on: October 29, 2014, 09:34:50 pm »
Make from a red oak board I got from Lowe's. Tips are cedar and there is a cedar piece in the handle. 62" N/N, around 40 lbs @ 32" ( I have a long draw length ). Backed with an unknown fabric ( seemed strong enough so I went with it ). Handle and limbs wrapped with cotton twine, and the strike plate is glass. I finished it with linseed oil. Put a few arrows through it today and it shot pretty good. Already started the next one, gonna be longer and made of maple.

I don't think my tiller is 100%, let me know what you think.   ;D

If you would hit the mark, you must aim a little above it: Every arrow that flies feels the pull of the earth.
― Henry Wadsworth Longfellow

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: My first successful bow!
« Reply #1 on: October 29, 2014, 09:38:29 pm »
Nothin wrong with that tiller I can see.  Nice job.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: My first successful bow!
« Reply #2 on: October 29, 2014, 09:41:39 pm »
I think that's a pretty good job for your first...but, cedar may be a little soft wood for a tip overlay.
DBar
« Last Edit: October 29, 2014, 09:49:37 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline Ozzy

  • Member
  • Posts: 543
Re: My first successful bow!
« Reply #3 on: October 29, 2014, 09:46:26 pm »
Looks good to me
THE BEST SUNRISES ARE SEEN 20 FEET UP A TREE.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My first successful bow!
« Reply #4 on: October 29, 2014, 09:49:43 pm »
Looks good to me also. Well done.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dueb

  • Member
  • Posts: 79
Re: My first successful bow!
« Reply #5 on: October 29, 2014, 09:52:17 pm »
Thanks guys!  ;D ;D ;D
If you would hit the mark, you must aim a little above it: Every arrow that flies feels the pull of the earth.
― Henry Wadsworth Longfellow

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: My first successful bow!
« Reply #6 on: October 29, 2014, 10:00:09 pm »
That is a great job! Congratulations! Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: My first successful bow!
« Reply #7 on: October 29, 2014, 10:03:57 pm »
Looks pretty good to me to! I like how you stepped out of the box and put your own flair on it. Those tips are interesting, could you post some better pics of them? Never seen one like that. Good first bow, Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline dueb

  • Member
  • Posts: 79
Re: My first successful bow!
« Reply #8 on: October 29, 2014, 10:18:02 pm »
Sure thing Lebhuntfish.

The wrap got a little messy when I burnt the ends...

If you would hit the mark, you must aim a little above it: Every arrow that flies feels the pull of the earth.
― Henry Wadsworth Longfellow

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: My first successful bow!
« Reply #9 on: October 30, 2014, 01:06:26 am »
That's definitely a different style of tip overlay. Your glue line looks good to!
The only thing I might say about it is that there is a good bit of extra weight out on the tips. That could cause a little hand shock. But if it shoots good, then who cares, right. I like them! Are the other grooves for decoration or did you put them on so you could use another bow string as a bow stringer? Well done, Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: My first successful bow!
« Reply #10 on: October 30, 2014, 05:26:28 am »
Tiller looks good,nice job, Cedar for overlays may be a little soft,I would watch them for wear. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: My first successful bow!
« Reply #11 on: October 30, 2014, 09:31:58 am »
  Your getting a lot of bend outa that 62"! :o  Nice work ;)
                                                                                                            Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline dueb

  • Member
  • Posts: 79
Re: My first successful bow!
« Reply #12 on: October 30, 2014, 10:20:44 am »
Pat, The cedar is really light so I wasn't worried about extra weight, and the grooves above the nocks are just for looks.  ;)

I'll be sure to keep an eye on that, thanks Pappy!  :)

Even I was surprised at how much it was bending, guess I got myself a good backing and a ton of the stuff left over!  ;D ;D
If you would hit the mark, you must aim a little above it: Every arrow that flies feels the pull of the earth.
― Henry Wadsworth Longfellow

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: My first successful bow!
« Reply #13 on: October 30, 2014, 10:36:00 am »
The tiller is V good, well done. The fancy work on grip and tips will get slicker as you do more.
You got the main thing spot on :)
Del
Health warning, these posts may contain traces of nut.

Offline Eric Krewson

  • Member
  • Posts: 5,412
Re: My first successful bow!
« Reply #14 on: October 30, 2014, 11:58:42 am »
I put a similar groove above my string nock for a simple parachute cord bow stringer.



« Last Edit: October 30, 2014, 12:01:49 pm by Eric Krewson »