« previous next »
Pages: [1]

Author Topic: Bamboo ipe osage tri lam  (Read 1721 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Bamboo ipe osage tri lam
« on: October 22, 2014, 02:06:30 am »
So I glued this together. Against better judgement... I already cut the boo for the last one and decided to go with the ash. So I had some stuff left over and threw this together. I'm aiming for a bendy handle. Figured I'd try osage and see of I can swing it. Was going for a sort of 5 curve. Well see. The lams are long in the pic, they end about an inch from the top of the block.
Logged
Nothing ventured nothing gained

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Bamboo ipe osage tri lam
« Reply #1 on: October 22, 2014, 07:01:04 am »
Is that inner tube wrapped around it?
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Bamboo ipe osage tri lam
« Reply #2 on: October 22, 2014, 08:28:27 am »
Yes
Logged
Nothing ventured nothing gained

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Bamboo ipe osage tri lam
« Reply #3 on: October 22, 2014, 09:40:51 am »
Reflex is generally better when added from mid limb out bruiser. You have a "v" shape going in the handle. Id suggest adding no more than 1/2-3/4" from the center line out 14-16" each way, then add a nice gradual 2-3" from there to the tips.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Bamboo ipe osage tri lam
« Reply #4 on: October 22, 2014, 11:21:40 am »
It doesn't keep a lot of it. So well see. This was just scrap so I figured I'd get more practice In
Logged
Nothing ventured nothing gained
Pages: [1]
« previous next »