Main Discussion Area > Horn Bows
water buffalo horn
Gaur:
James must be hunting :).
I'd say square up the horn. Only thing you can do is grind the ridges off. How much width do you still have it you take the narrowest point there? Should still be plenty from the looks of it to me.
My understanding is that the tips go in the handle area butted together. Don't cut them off too much as the handle will be thinner anyway. Wait for more experienced guys on horn bow to sound off here before doing much else though. Good luck
Tc:
This is the shape the stripe should look like at the end of the process:
The thicker end goes to the grip.
Your pair of horn is a real challange I am afraid.....
duke3192:
Tc, is that one cut from each horn, where did you get your horn from, if you don't mind telling us. Can I get you to do mine those look great.
mullet:
After the snow in NC, James probably doesn't have internet. He lost it and power last year, also. I'll try to call him tonight.
Johnny, come on down and use my grinders. They'll eat that horn up. I'm getting ready to grind two 30"+ horns.
Tc:
Duke, pm sent
Tc
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version