« previous next »
Pages: 1 2 [3]

Author Topic: How I made my reflex/deflex caul! (photos fixed)  (Read 49853 times)

0 Members and 1 Guest are viewing this topic.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: How I made my reflex/deflex caul! (photos fixed)
« Reply #30 on: July 25, 2024, 04:49:55 am »
Once again I would like to bring this build along back to life. I have had lots of questions about it and I always tell them to look it up on here. It's hard to find stuff sometimes because thee are so many post.

I hope this helps someone!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: How I made my reflex/deflex caul! (photos fixed)
« Reply #31 on: July 25, 2024, 10:02:20 am »
Thanks for bringing this thread back up for folks, Patrick.  :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PeteC

  • Member
  • Posts: 2,014
Re: How I made my reflex/deflex caul! (photos fixed)
« Reply #32 on: November 28, 2024, 02:50:50 pm »
Good job on that caul. Just curious, did you use steam or dry heat to get that stave in the caul? Thanks , God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas
Pages: 1 2 [3]
« previous next »