« previous next »
Pages: 1 [2]

Author Topic: the centre line when doing a bow template for longbows  (Read 7255 times)

0 Members and 1 Guest are viewing this topic.

mikekeswick

  • Guest
Re: the centre line when doing a bow template for longbows
« Reply #15 on: October 03, 2014, 03:15:37 am »
Follow the grain and then bend it straight with dry heat and oil.
Logged

Offline TheDukesArchers

  • Member
  • Posts: 128
Re: the centre line when doing a bow template for longbows
« Reply #16 on: October 03, 2014, 03:47:28 am »
Quote from: mikekeswick on October 03, 2014, 03:15:37 am
Follow the grain and then bend it straight with dry heat and oil.

A good idea, but quite complicated for me right now. Never done it before, and I really want this bow to work out.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: the centre line when doing a bow template for longbows
« Reply #17 on: October 03, 2014, 05:08:13 am »
Just seen that pic.
In fact if you look at the surface of the sapwood, there are fine lines following along the string line exactly!
That slight angle is no prob' at all.
After all if you think about a pyramid bow the libs taper a lot in width so it's impossible for both edges to follow the grain!
Most staves have some degree of twist or variation in grain direction. IMO no problem.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: the centre line when doing a bow template for longbows
« Reply #18 on: October 03, 2014, 03:43:12 pm »
laying a straight string out,, will usually not give you the center line of the stave,,  drawing a line free hand down the middle following the grain will be better,, even if not straight,, you can straighten the bow if needed when you rough out the bow,,
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: the centre line when doing a bow template for longbows
« Reply #19 on: October 04, 2014, 10:43:45 pm »
TheDukesArchers won't be answering questions either, he and Bullerboy are one and the same.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline WillS

  • Member
  • Posts: 1,905
Re: the centre line when doing a bow template for longbows
« Reply #20 on: October 05, 2014, 04:50:20 am »
Glad that's finally revealed on here.  The chaos he caused on here and Facebook (including blaming others for his disgusting behaviour towards members of this forum in private messages) made him rather unpopular and I didn't like the idea that he would get away with it and still be able to post on here for advice.

It's like squirrel slayer all over again.... Only worse and far more personal!!
Logged

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: the centre line when doing a bow template for longbows
« Reply #21 on: October 05, 2014, 10:42:08 am »
Thank you mullet, it only takes one bad apple to ruin it for everyone. Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: the centre line when doing a bow template for longbows
« Reply #22 on: October 05, 2014, 10:50:15 am »
Well guys, we are all responsible for keeping this site running smoothly. If you see potential problem or trouble maker please report it to one of the Admins or Mods. so we can nip it in the bud before it gets out of hand. A quick PM or email will give us a heads up to the potential problem so we can take care of it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline adb

  • Member
  • Posts: 5,339
Re: the centre line when doing a bow template for longbows
« Reply #23 on: October 05, 2014, 01:11:20 pm »
Quote from: WillS on October 05, 2014, 04:50:20 am
Glad that's finally revealed on here.  The chaos he caused on here and Facebook (including blaming others for his disgusting behaviour towards members of this forum in private messages) made him rather unpopular and I didn't like the idea that he would get away with it and still be able to post on here for advice.

It's like squirrel slayer all over again.... Only worse and far more personal!!

He's been revealed, banned, and blocked and on every forum, email, and facebook group he was involved in. Good riddance. Maybe he'll find something else to do.
Logged
Pages: 1 [2]
« previous next »