« previous next »
Pages: [1] 2

Author Topic: Hide/sinew Glue  (Read 5070 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Hide/sinew Glue
« on: September 28, 2014, 12:18:26 pm »
A while I made some hide glue from dog bone rawhide. I turned out beautifully clear, like butterscotch candy. I made some the other day from sinew scraps and knee joints and stuff. It gelled really well and in all respects looked great except it was cloudy. Does the cloudiness affect the quality of the glue? If so is there a way to clarify it?
Logged

Offline Zuma

  • Member
  • Posts: 4,324
Re: Hide/sinew Glue
« Reply #1 on: September 28, 2014, 03:05:25 pm »
Wish I could help. Only advise is beware
of the dog you stole the bone from.
Good luck with a neat project.
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #2 on: September 28, 2014, 03:22:05 pm »
I went to a local butcher to get beef sinew. They were tossing the sinew in a bucket. I guess they got tired of separating sinew from bones so they threw in a bunch of knee/ankle joints with sinew attached. After I separated the sinew I thought I would make glue from the leftovers. Like I said, it gelled real well but was cloudy. I wasn't sure it would make good glue so I made French Onion soup with it. Good soup!
Logged

Offline tipi stuff

  • Member
  • Posts: 311
  • Curtis Carter
Re: Hide/sinew Glue
« Reply #3 on: September 28, 2014, 05:09:19 pm »
I've made a lot of glue from sinew. I haven't done any comparative testing on it, but it holds well. I have sinew backed many, many bows with it and never had a problem. Curtis
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #4 on: September 28, 2014, 08:03:46 pm »
Hi Curtis, does your sinew glue turn out nice and clear or is it cloudy?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Hide/sinew Glue
« Reply #5 on: September 28, 2014, 11:09:55 pm »
I've made a few batches of sinew glue and it was a clear amber color after I strained it.
Logged
I started out with nothin' and I still got most of it left

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #6 on: September 29, 2014, 12:28:21 am »
What did you strain it with?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Hide/sinew Glue
« Reply #7 on: September 29, 2014, 12:38:52 am »
Some fabric that was on the flat part of a bed skirt.  It is pretty fine and doesn't let any solids pass through.
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Hide/sinew Glue
« Reply #8 on: September 29, 2014, 11:29:04 am »
 Do a strength test and compare it with the clear glue.   I've not made hide glue but the commercial stuff I use is never crystal clear.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #9 on: September 29, 2014, 12:34:06 pm »
I'll do that. If I glue couple of pieces of wood together how long should I let it dry before testing it ?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Hide/sinew Glue
« Reply #10 on: September 29, 2014, 12:59:56 pm »
add glue to both pieces of wood and let that dry then glue them together.   I'd give it at least a few days in a dry climate. Longer id humid.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #11 on: September 29, 2014, 01:19:36 pm »
Well, so much for that. I can't find my nice clear glue. Must have used it or something. Maybe I'm just old ???
Logged

Offline tipi stuff

  • Member
  • Posts: 311
  • Curtis Carter
Re: Hide/sinew Glue
« Reply #12 on: October 05, 2014, 08:51:06 am »
I strain mine too, sometimes with cheese cloth. Mine is always a little cloudy.  CC
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Hide/sinew Glue
« Reply #13 on: October 05, 2014, 10:02:58 am »
A coffee filter works well for removing finer particles.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Hide/sinew Glue
« Reply #14 on: October 05, 2014, 12:41:53 pm »
Do you strain it as soon as you take the hide/sinew out or wait until it thickens a bit?
Logged
Pages: [1] 2
« previous next »