Author Topic: hand splitting chokecherry  (Read 2210 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
hand splitting chokecherry
« on: September 29, 2014, 12:49:09 am »
i was thinking of getting some chokecherry..just to try a different wood.i have herd it makes a pritty good bow...BUT,does any one know how it splits...john

Offline usmcsgt

  • Member
  • Posts: 22
  • David Hopwood
Re: hand splitting chokecherry
« Reply #1 on: September 30, 2014, 02:38:44 am »
Hey John,

 I haven't had any trouble splitting Chokecherry. Are you still in Oregon ? On most of the Chokecherry that I used before, I just took the draw knife to it and sealed the areas that I worked and clamped it down (since these were smaller saplings).

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: hand splitting chokecherry
« Reply #2 on: September 30, 2014, 09:42:47 am »
I have heard mixed reviews.  I took mine to the band saw.  It worked nice.  I'm currently working one with quite a bit if character.  I'll share my results in a couple months  :),  I'm slow

Offline kleinpm

  • Member
  • Posts: 218
Re: hand splitting chokecherry
« Reply #3 on: September 30, 2014, 02:14:23 pm »
I am guessing that the CC in Oregon is similar to the stuff we have in Montana. I have made three CC bows  - I have never seen a CC that wasn't twisted enough to make splitting impossible. I don't know that i have seen one big enough to split either.

I ignore the twist and rough out the bow, clamp to something, and let it dry.

Patrick