« previous next »
Pages: 1 [2]

Author Topic: Latest Maple Lam Bow  (Read 4547 times)

0 Members and 1 Guest are viewing this topic.

Offline Pago

  • Member
  • Posts: 45
Re: Latest Maple Lam Bow
« Reply #15 on: September 23, 2014, 06:20:32 pm »
I like idea behind the bow what is the thickness of the back and belly lams?  Looks like about 5/16 a piece?
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Latest Maple Lam Bow
« Reply #16 on: September 23, 2014, 06:40:01 pm »
Quote from: Pago on September 23, 2014, 06:20:32 pm
I like idea behind the bow what is the thickness of the back and belly lams?  Looks like about 5/16 a piece?

I normally end up with a total thickness of 7/16"  (approx.)  using only 2 lams.  Trilam would be better.  This photo shows what I aim for when ripping the material.  I use an open form with 3-4" blocks on the ends for the reflex.  You have to grind down one of the lams so they will bend during glue up.  This was the first one I built using a power lam.
« Last Edit: September 23, 2014, 06:43:50 pm by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Pago

  • Member
  • Posts: 45
Re: Latest Maple Lam Bow
« Reply #17 on: September 24, 2014, 01:32:35 am »
I agree a tri-lam would be better but, personally I like novel ways of building bows.  My estimate was way off, I was looking at the 1/8" powerlam and trying to make out the thickness of the front and back in the middle of the bow.  Any other specs you care to share would be great to know.
Logged
Pages: 1 [2]
« previous next »