« previous next »
Pages: [1]

Author Topic: Tiller check please  (Read 1276 times)

0 Members and 2 Guests are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Tiller check please
« on: September 17, 2014, 06:31:50 pm »
Does the bend in the unbraced left limb explain the extra bend in the full draw. It's a bow for my granddaughter. I'm shooting for 35# and I'm at about 38 now. I don't want to scrape much more if I don't have to. Thanks
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: Tiller check please
« Reply #1 on: September 17, 2014, 06:44:23 pm »
Yes the deflex in the left limb will show a little more. The right limb is just a little flat right before the kink.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Tiller check please
« Reply #2 on: September 17, 2014, 06:47:34 pm »
So a few more scrapes on the right side just inside the kink?
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: Tiller check please
« Reply #3 on: September 17, 2014, 07:06:52 pm »
Hi dc,what type of wood do you have there?
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bubby

  • Member
  • Posts: 11,054
Re: Tiller check please
« Reply #4 on: September 17, 2014, 07:34:37 pm »
like jon said but if it's shooting good put a bunch through it and finish it, we all chase that "perfect tiller" and lots of times end up with a kids bow ;) finish it :)
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JonW

  • Member
  • Posts: 1,906
Re: Tiller check please
« Reply #5 on: September 17, 2014, 07:35:52 pm »
Not too close to the kink or it may hinge if you take too much. Back about 2-3 inches from the kink.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Tiller check please
« Reply #6 on: September 17, 2014, 07:58:00 pm »
Bushboy- It's Douglas Maple. Here's a link to what it used to look like   http://www.primitivearcher.com/smf/index.php/topic,42864.0.html
This is reaction wood. :D

Bubby-I'm sanding as we speak. Actually it's supposed to be a kids bow.We'll see if I like it. It's 35# approx @ 27". Maybe I can use it to build some muscle.

JonW_ I came in a bit more maybe 4-5". I'm happy. It lost a couple of pounds so I called it quits
Logged
Pages: [1]
« previous next »