« previous next »
Pages: [1]

Author Topic: CAN 64" ELM MAKE A RECURVE?  (Read 1559 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
CAN 64" ELM MAKE A RECURVE?
« on: September 15, 2014, 01:08:38 pm »
I'll try to get a pic up.  I've got it steamed as R/D 64" long.  Board I sawed from a smallish log and spliced.  Limbs are a blend of heart wood and sap wood.  It feels really springy but i'm going to back it.  Haven't decided with wyat yet.  May try 100% nylon uphulstry thread as a sinew substitute. 

Other wise I'll use rawhide.

Anyway i'm looking at it and wondering if I could flip those tips up a bit further and get a recurve? 

Right now I'm at 64" long.  I could keep it to say 3-4 inches of tip brought up another 45 deg ish?

I'm just worried that will make a bow that is too short to ge the full 28".  I've got limbs 2" wide for all but the last 8" which tapers to 5/8" for now.  Fixed riser.

Think this could make a workable recurve or should I stick with the R/D I started for?

I don't know what kind of elm it is.  Nieghbors yard variety.  I live in Iowa so what ever grows around here.  I think I like its springyness.

Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #1 on: September 15, 2014, 01:31:33 pm »
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #2 on: September 15, 2014, 02:09:37 pm »
There is no need to back it at all and 64" is plenty for 28".
Logged

Offline NTD

  • Member
  • Posts: 1,771
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #3 on: September 15, 2014, 02:46:50 pm »
Logged
Nate Danforth

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #4 on: September 15, 2014, 03:05:50 pm »
Logged
Simon
Bavaria, Germany

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #5 on: September 15, 2014, 03:51:38 pm »
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #6 on: September 15, 2014, 06:05:06 pm »
Quote from: PatM on September 15, 2014, 02:09:37 pm
There is no need to back it at all and 64" is plenty for 28".

It is a spliced board.
Logged

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #7 on: September 16, 2014, 01:29:39 am »
Wow...... I could get more of this.  I had no IDE it could be so good.

How long on the ground is too long?
Logged

mikekeswick

  • Guest
Re: CAN 64" ELM MAKE A RECURVE?
« Reply #8 on: September 16, 2014, 03:13:27 am »
How long is a piece of string!!!!
If there is any discolouration under the bark then I wouldn't bother....but there is more elm here than enough....
No need whatsoever to back elm...it's probably tougher than what you'll use to back it anyway. Spliced billets don't make any difference.
Logged
Pages: [1]
« previous next »