« previous next »
Pages: [1]

Author Topic: Reaction wood  (Read 1404 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Reaction wood
« on: September 10, 2014, 04:00:01 pm »
The Doug Maple I cut was leaning so I'm going to have reaction wood. When I tie it down to stop it bending how robust does the tying have to be to control it? Will a few wraps of duct tape(quite a few) do it or do I have to clamp it with bolts or such?
Thanks
Don
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Reaction wood
« Reply #1 on: September 10, 2014, 04:28:09 pm »
I use clamps to get it tight and where I want it, then just use any rope I got lying around
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Reaction wood
« Reply #2 on: September 10, 2014, 04:31:03 pm »
cargo straps work great and you can usually find some for cheap
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Reaction wood
« Reply #3 on: September 10, 2014, 04:37:50 pm »
Do you tie it to a 2x4 or something bigger?
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Reaction wood
« Reply #4 on: September 10, 2014, 04:40:21 pm »
i tied my staves together with with blocks of wood between them as spacers for air flow
Logged
Pages: [1]
« previous next »