Main Discussion Area > Horn Bows

My project.

<< < (5/5)

mikekeswick:
I know it's not 'authentic' but if you want to get a bow out of these horns with less chance of failure I personally would use a wooden core to glue them to. If you do it the same way as Turkish bows eg. a thick core then the horn (less stiff than wood) will conform to the shape of the wood. If you did it this way then you could easily get a full draw bow out of them. It would all depend on the horns current dimensions.
Have you got Adam's book? If so I don't need to try and explain more!

james parker:
what mike said. :)

Parnell:
Ok, something to think about...

Navigation

[0] Message Index

[*] Previous page