« previous next »
Pages: [1]

Author Topic: tree ID please  (Read 2122 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
tree ID please
« on: September 02, 2014, 09:26:56 pm »
Can anyone tell me what kind of tree this leaf belongs too? The bark is kind of similar to white oak or elm. I live in southern Michigan
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: tree ID please
« Reply #1 on: September 02, 2014, 09:30:51 pm »
Does it smell like rootbeer? Looks like sassafrass.
Logged

Offline BowJunkie

  • Member
  • Posts: 283
Re: tree ID please
« Reply #2 on: September 02, 2014, 09:32:41 pm »
Looks like sassafras to me
Logged
Johnny
in Texas

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: tree ID please
« Reply #3 on: September 02, 2014, 09:36:44 pm »
Thanks guys yeah I just Identified it via google. Will it make a good bow?
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: tree ID please
« Reply #4 on: September 02, 2014, 09:42:19 pm »
Depends on who you ask. I've made three from it and will say yes. Others will have a different answer. The stuff I used had good rings so I chased a good ring for the back. It's the lightest in physical weight wood I've ever worked.
Logged

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: tree ID please
« Reply #5 on: September 02, 2014, 10:27:24 pm »
I've wondered about using sassafrass. What style bow are you planning on making? Keep us posted.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: tree ID please
« Reply #6 on: September 03, 2014, 07:12:11 am »
Well I'm not sure If I will cut it yet. If I do attempt it it will be a two inch wide 67" flatbow
Logged

Offline J05H

  • Member
  • Posts: 478
Re: tree ID please
« Reply #7 on: September 03, 2014, 07:21:48 am »
I cut some a couple of months ago and did a bit of research on it here on PA. The consensus seemed to be that its better at compression than tension and so needs a wide flat back to handle the tension and a rounded belly to take the load off the back. Keep in mind, I've never made one. I'm just sharing the results of my research.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: tree ID please
« Reply #8 on: September 03, 2014, 08:24:11 am »
Heck id dig up some of the root and make some tea!
Logged
laugh. its good for ya

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: tree ID please
« Reply #9 on: September 03, 2014, 11:41:50 am »
Its very crumbly/porous, very soft and not really good wood at all. Smells nice.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Jim Davis

  • Member
  • Posts: 1,351
  • Reparrows
    • Reparrows
Re: tree ID please
« Reply #10 on: September 03, 2014, 11:02:30 pm »
The heart wood makes good fence posts.
Logged
Jim Davis

Kentucky--formerly Maine

Offline 1442

  • Member
  • Posts: 1,020
Re: tree ID please
« Reply #11 on: September 03, 2014, 11:38:39 pm »
It  is very good for cooking too. makes a great flavored smoke and will burn green
Logged
Pages: [1]
« previous next »