Author Topic: arrow hot box  (Read 2406 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
arrow hot box
« on: August 30, 2014, 07:19:45 pm »
anyone try a hotbox for arrows, I have a bunch of Tonkin I need to straighten and was thinking you could throw some in a hotbox and get them nice and hot, then take one out and maybe roll them straight on a flat surface , anyone try this?
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: arrow hot box
« Reply #1 on: August 30, 2014, 08:06:59 pm »
I don't know if you can get them hot enough in a standard hot box.  I have heard of folks using a pizza oven but that get closer to 500deg.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline warpath

  • Member
  • Posts: 365
Re: arrow hot box
« Reply #2 on: August 30, 2014, 08:19:14 pm »
Never tried a hotbox for arrows. Usually a heat gun or hold over some hot coals. Then roll straight on a flat piece of marble I've got.

  g

Offline bubby

  • Member
  • Posts: 11,054
Re: arrow hot box
« Reply #3 on: August 30, 2014, 08:42:53 pm »
I was thinking of using a floor heater for the heat source and some of that roll foil insulation it's 4 ft long and should get pretty hot
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: arrow hot box
« Reply #4 on: August 31, 2014, 12:21:31 am »
My shop is a Hot box right now.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bubby

  • Member
  • Posts: 11,054
Re: arrow hot box
« Reply #5 on: August 31, 2014, 01:26:58 am »
I know what you mean Eddie
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: arrow hot box
« Reply #6 on: September 02, 2014, 09:06:41 pm »
I bet you could make a coffee can forge that is supplied by a heat gun.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: arrow hot box
« Reply #7 on: September 02, 2014, 09:29:03 pm »
I use a propane torch  :o , I guess my heat gun leaves something to be desired.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.