Author Topic: Building a reflex / deflex caul help needed  (Read 3195 times)

0 Members and 1 Guest are viewing this topic.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Building a reflex / deflex caul help needed
« on: August 17, 2014, 02:11:37 am »
I have been working on a reflex / deflex caul and have modified my original design because I had too much deflex in it and the form and it was too long. I don't have access to a bow that I could trace. And i'm just going by my own thought of what it should look like. I like the reflex part but not sure about the deflex part of it. I thinh it should have more "swoop" to the center. What do you think, any suggestions, ideas, input or other would be great. Here is what I have so far.

This is the original plan before I cut it down.



Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline GB

  • Member
  • Posts: 519
Re: Building a reflex / deflex caul help needed
« Reply #1 on: August 17, 2014, 03:57:13 am »
I've only made a few R/D longbows (all tri-lams) and I'm no expert, so take this with a few grains of salt.  Lately I'm leaning more toward less deflex and more reflex for that type of profile.  The form I made is 1 1/2" deep at the deflex part.  I'm thinking about building it up so it's only 3/4" for the next one I make.  Here's my form and the last tri-lam I made with it.  The bow is hickory backed osage with a cherry core, 66" long.







I made a recurve form with way, way too much deflex in it.  Since then, I've gone to putting just a little deflex in recurves.  I just filled in my form with a couple of blocks.



Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Building a reflex / deflex caul help needed
« Reply #2 on: August 17, 2014, 04:41:23 pm »
Thanks buddy,  from the looks of your form I need to take some of the "hump" off of the reflex part of my caul. Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline GB

  • Member
  • Posts: 519
Re: Building a reflex / deflex caul help needed
« Reply #3 on: August 17, 2014, 05:47:07 pm »
Maybe.  It's kind of a guessing game.  My take on it is you just don't want to put too much deflex into it.  IMHO you'll have a snappier shooting bow if the shape of your form will make a bow with the tips a bit in front of the handle after it's shot in.  But I'm still learnin' here, too.  :)  Good luck on your bow!
« Last Edit: August 17, 2014, 05:56:53 pm by GB »
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Building a reflex / deflex caul help needed
« Reply #4 on: August 17, 2014, 06:03:02 pm »
Thanks again GB. Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Building a reflex / deflex caul help needed
« Reply #5 on: August 18, 2014, 11:25:24 pm »
Any other info guys!
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Building a reflex / deflex caul help needed
« Reply #6 on: August 19, 2014, 12:22:28 am »
Mine is just a deflex caul, I pegged it with 3/8 dowels to use with inner tube rubber bands. I have found that a good quality twine woven in an X pattern seems to work as well. But, I'm a noob.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline GB

  • Member
  • Posts: 519
Re: Building a reflex / deflex caul help needed
« Reply #7 on: August 19, 2014, 05:04:03 am »
Patrick, did you see the other thread on R/D cauls?  Will H posted some pictures of a really good looking caul that he uses.  Check it out...
Yeah, I remember when we had a President who didn't wear a tinfoil hat.