Re-Tiller Check please

[Vgo750]

Hickory pyramid bow 63" ttt.  Got frisky one night and got her to 50@27 shown here:



But then heat treated and added a bit of reflex and flip tippage shown here:



And now I sit at 45@23 shown here:



Now, I am pretty prone to paralysis by analysis so I figured I would let you experts...and yall are experts...weigh in.  I am looking for ~55@27.  Before I heat treated the left limb was bending too much about 1/3rd out from the fade and not enough at the fade...the right was pretty not bad.  Are yall still thinking the same thing now?

Thank yall!

[bow101]

Looks pretty good to me. 

[Pat B]

Looks good but you could get the outer limbs bending a bit more. I usually leave the last 6" stiff.

[gianluca100]

I'd also say that the bend is located too much at the fades but without seeing the front view profile I don't want to give any definitive statement :-)

ciao,
gianni

[Del the cat]

I'm pretty much with Pat.
I was going to say the left was a bit stiff in the outer third, but it has some reflex there when unstrung... so all in look pretty good to me.
Del

[Pappy]

If the left is the bottom limb I would call it good until I shot it some,if you are at the weight you want and draw length I would call it done, if you still have some weight to give what Pat/Del said.
   Pappy     

[bradsmith2010]

nice bow,,,,