Author Topic: BL stave suggestions needed- many pics  (Read 6378 times)

0 Members and 2 Guests are viewing this topic.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: BL stave suggestions needed- many pics
« Reply #30 on: July 31, 2014, 04:44:04 pm »
I would heat treat it and add some reflex, but set won't be undone; you can only hide it and hope to avoid more of it. The cells that are crushed are crushed, but strengthening the remaining cells and adding reflex might reduce string follow.
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline GlisGlis

  • Member
  • Posts: 1,559
Re: BL stave suggestions needed- many pics
« Reply #31 on: August 06, 2014, 07:24:21 am »
Heat treated it, retiller corrections and shooted it several times !!!
I really like it.
I have to experiment a little with arrow spine to find the best combination but it's allready fast, accurate and silent.
At least for my standards  :D
I had tons of ideas for decorations, tips overlay and such but I think I'll leave it as is.
Simple and plain wood with some rope attached to.
Ahh..... life is good  ;)

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: BL stave suggestions needed- many pics
« Reply #32 on: August 06, 2014, 10:46:34 am »
Your trials/tribulations with this stave and the helpful advice offered to solve same have made this a good read.
And congrats on final result!
Michael
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: BL stave suggestions needed- many pics
« Reply #33 on: August 06, 2014, 03:37:45 pm »
that looks great congrats

Offline GlisGlis

  • Member
  • Posts: 1,559
Re: BL stave suggestions needed- many pics
« Reply #34 on: August 06, 2014, 07:00:18 pm »
tankyou Michael and Brad
but at least half of the work was made by this forum ;)