Author Topic: Any honey locusts experts out there?  (Read 3924 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Any honey locusts experts out there?
« on: August 09, 2014, 07:16:30 pm »
I cam across a honey locusts about 8" in diameter standing dead.  I was able to push it over.   Would it be worth the trouble of bringing it home?
Freedom dies one compromise at a time. III%

Offline JonW

  • Member
  • Posts: 1,906
Re: Any honey locusts experts out there?
« Reply #1 on: August 09, 2014, 07:58:00 pm »
I don't think I would mess with it. Not the same wood as Osage and Black locust.

Offline wapiti1997

  • Member
  • Posts: 414
    • Joe Lacefield Wildlife and Nature Photography
Re: Any honey locusts experts out there?
« Reply #2 on: August 09, 2014, 08:25:14 pm »
It's a beautiful grained wood, but has swirls where the thorns were making a selfbow a real challenge.  A dead standing tree probably has some issues..

Offline IndianGuy

  • Member
  • Posts: 289
Re: Any honey locusts experts out there?
« Reply #3 on: August 09, 2014, 08:28:24 pm »
I have sinew backed several honey locust bows,the wood is white as it can be and light but is surprisingly good in compression strength. I have heat treated the belly and left some plain and couldn't see a difference in either. Now the bows I made were short 50" or less. I haven't tried a long bow from it but plan too as I harvest several logs last year. Give it a try, I might suggest a 1.5" wide mid limb tapering to 1/2" tips, that's a safe design.
E

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Any honey locusts experts out there?
« Reply #4 on: August 09, 2014, 08:39:26 pm »
It's a beautiful grained wood, but has swirls where the thorns were making a selfbow a real challenge.  A dead standing tree probably has some issues..

I agree Wapiti ....dead standing honey locusts probably will have some rot issues................
Integrity is doing the right thing when no one is looking

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Any honey locusts experts out there?
« Reply #5 on: August 09, 2014, 08:52:42 pm »
i tried a dead standing and had some rot issues,,,yours may be ok,,,, only one way to know,,, :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Any honey locusts experts out there?
« Reply #6 on: August 09, 2014, 08:55:15 pm »
I wouldn't use standing dead tree for bow wood. If you can kick it over its too far gone.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Any honey locusts experts out there?
« Reply #7 on: August 09, 2014, 09:04:51 pm »
There is a reason why you can push over a standing dead tree...
It is called rot.
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Badger

  • Member
  • Posts: 8,124
Re: Any honey locusts experts out there?
« Reply #8 on: August 09, 2014, 09:15:03 pm »
  Honey locust isn't much good when it is cut green.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Any honey locusts experts out there?
« Reply #9 on: August 09, 2014, 09:22:04 pm »
  Honey locust isn't much good when it is cut green.


I agree................
Integrity is doing the right thing when no one is looking

Stringman

  • Guest
Re: Any honey locusts experts out there?
« Reply #10 on: August 09, 2014, 10:24:43 pm »
Very brittle and prone to decay.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Any honey locusts experts out there?
« Reply #11 on: August 10, 2014, 12:33:58 am »
Like it's been said, honey locust just doesn't last after death like black locust and osage. Dead standing black locust is some of my favorite stuff to work with, always a rich brown after finishing.
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

blackhawk

  • Guest
Re: Any honey locusts experts out there?
« Reply #12 on: August 11, 2014, 08:31:51 am »
I cam across a honey locusts about 8" in diameter standing dead.  I was able to push it over.   Would it be worth the trouble of bringing it home?

Short answer....    NO!!!!

Offline DavidV

  • Member
  • Posts: 472
Re: Any honey locusts experts out there?
« Reply #13 on: August 11, 2014, 03:54:16 pm »
Honey locust is pretty wood but any attemp I've made has resulted in frets and set, even when tillered well. It isn't rot resistant so a dead standing tree isn't a good choice.
Springfield, MO