« previous next »
Pages: [1]

Author Topic: Removal of Spar Varathane?  (Read 1719 times)

0 Members and 2 Guests are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Removal of Spar Varathane?
« on: July 30, 2014, 03:16:54 pm »
What is the best way to remove spar varathane from a bow and not lose draw weight?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Removal of Spar Varathane?
« Reply #1 on: July 30, 2014, 03:22:33 pm »
Light scraping and sanding.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline okie64

  • Member
  • Posts: 1,134
Re: Removal of Spar Varathane?
« Reply #2 on: July 30, 2014, 03:27:57 pm »
Lacquer thinner will take it off also, how much you have to scrub it depends on how much spar you have on the bow.
Logged

Offline BrokenArrow

  • Member
  • Posts: 168
Re: Removal of Spar Varathane?
« Reply #3 on: July 30, 2014, 03:37:18 pm »
One coat
Logged

Offline okie64

  • Member
  • Posts: 1,134
Re: Removal of Spar Varathane?
« Reply #4 on: July 30, 2014, 05:02:50 pm »
Either way will work. If you have some lacquer thinner you could use it but if not just scrape and sand like Pat said. Its kinda pricey and probably not worth buying a whole can unless you plan on using it for other projects.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Removal of Spar Varathane?
« Reply #5 on: July 30, 2014, 06:22:53 pm »
If you had lots of coats on, there is some stuff, kinda pricey that will remove darn near anything. It's called JASCO varnish and stain remover. It is made for stripping wooden floors, and it will do that.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: [1]
« previous next »