Author Topic: Backpack challenge bow 2.0  (Read 2371 times)

0 Members and 1 Guest are viewing this topic.

Offline autologus

  • Member
  • Posts: 1,092
Backpack challenge bow 2.0
« on: July 22, 2014, 12:29:52 pm »
Here is going to be try #2.  This attempt will be from a stave, it is Parsley Hawthorn that has been cured for about a year and a half.  This stuff will teach you some lessons on preparing your wood for curing.  This stuff will check like crazy if not sealed good and I am talking about long deep cracks often in a spiral so seal it well and let it cure slowly.

It is 40" long and about 0.7" thick and 1.75" wide and has about 2" reflex, the stave has one knot on the side that I think will be gone when the limbs are reduced in thickness and there is one nipple on the back but will be dead center of the limb so I don't think it will be a problem.  The thing is I have never worked Hawthorn and don't really know how to go about design.  I do know this stuff is dense, any advice on how to design it properly and any pitfalls I should be aware of will be greatly appreciated.

Grady









Proud Hillbilly from Arkansas.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Backpack challenge bow 2.0
« Reply #1 on: July 22, 2014, 01:18:35 pm »
That's a lot of reflex in such a short piece.

Offline bubby

  • Member
  • Posts: 11,054
Re: Backpack challenge bow 2.0
« Reply #2 on: July 22, 2014, 01:21:55 pm »
Yeah I don't think reflex and 40" ntn is two things that go together , prove me wrong
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline autologus

  • Member
  • Posts: 1,092
Re: Backpack challenge bow 2.0
« Reply #3 on: July 22, 2014, 01:35:44 pm »
I am going to give it a go, it will either bend or it will break.  :laugh:

Grady
Proud Hillbilly from Arkansas.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Backpack challenge bow 2.0
« Reply #4 on: July 22, 2014, 06:04:53 pm »
Good luck Grady.  Looks like a fun challenge.   :)

Offline Crogacht

  • Member
  • Posts: 455
Re: Backpack challenge bow 2.0
« Reply #5 on: July 22, 2014, 06:13:34 pm »
I am going to give it a go, it will either bend or it will break.  :laugh:

Grady

Maybe both!  ;D

Goodluck Grady

Offline autologus

  • Member
  • Posts: 1,092
Re: Backpack challenge bow 2.0
« Reply #6 on: July 24, 2014, 09:21:38 am »
Anyone have any design advice on this stave, or any advice on using Hawthorn?

Grady
Proud Hillbilly from Arkansas.

Offline autologus

  • Member
  • Posts: 1,092
Re: Backpack challenge bow 2.0
« Reply #7 on: July 26, 2014, 11:39:08 am »
Here is the fate of version 2.0, I had it braced and was working on getting the tiller straightened out and had it out to 13 inches when crack it popped a splinter just behind the nipple on the back.  Maybe I will have better luck with version 3.0. The first pic is the splinter and the second pic is going to be version 3.0.

Grady

Proud Hillbilly from Arkansas.

Offline TRACY

  • Member
  • Posts: 4,523
Re: Backpack challenge bow 2.0
« Reply #8 on: July 26, 2014, 08:02:28 pm »
Looks like that crack will take the whole bottle of superglue but might be worth it. Doesn't look like it's running off the edge, especially at 13" already with only a little more to go. Never worked hawthorn so not sure how it bends. Good luck

Tracy
It is what it is - make the most of it!    PN500956

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Backpack challenge bow 2.0
« Reply #9 on: July 26, 2014, 08:33:52 pm »
Growth rings are very fine with Hawthorne so you have to remove the bark very carefully.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline autologus

  • Member
  • Posts: 1,092
Re: Backpack challenge bow 2.0
« Reply #10 on: July 27, 2014, 12:11:56 am »
Yeah, I used a bunch of CA glue but it popped again I think there was a nick in the back near that limb like Marc said.  Oh well I have two more in the works one hickory the other ash backed ERC.

Grady
« Last Edit: July 27, 2014, 09:46:45 am by autologus »
Proud Hillbilly from Arkansas.