« previous next »
Pages: [1]

Author Topic: screw in to glue on  (Read 2968 times)

0 Members and 1 Guest are viewing this topic.

Offline 4dog

  • Member
  • Posts: 1,610
screw in to glue on
« on: July 14, 2014, 02:43:56 pm »
anybody ever convert screw in broadheads to glue on...and if so...lol...howdya do it ???
Logged
"SET" is always there !!!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: screw in to glue on
« Reply #1 on: July 14, 2014, 02:57:07 pm »
3rivers sells an adapter for screw in broadheads

Logged
I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: screw in to glue on
« Reply #2 on: July 14, 2014, 03:02:46 pm »
Ya beat me to it clint
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline tallpine

  • Member
  • Posts: 183
  • East Texas
Re: screw in to glue on
« Reply #3 on: July 14, 2014, 03:04:35 pm »
Just lightly heat them up with a Propane torch, the adapter comes right out, the taper is the same. They will be about 15 gr. lighter.
Logged

Offline 4dog

  • Member
  • Posts: 1,610
Re: screw in to glue on
« Reply #4 on: July 14, 2014, 03:58:26 pm »
thanks guys..what about glue in inserts with threads..anyone have those?
Logged
"SET" is always there !!!

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: screw in to glue on
« Reply #5 on: July 14, 2014, 05:27:22 pm »
4dog, I've got some older ones that look like aluminum. Problem I have with them is they won't fit a tapered point end yet a 5/16" or 11/32" shaft won't fit them without tapering. The taper inside the adapter doesn't seem to be the standard taper. I had to fuss and sandpaper them by hand to fit.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.
Pages: [1]
« previous next »