« previous next »
Pages: [1]

Author Topic: Saxton/Young style broad head decision  (Read 1643 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Saxton/Young style broad head decision
« on: July 05, 2014, 04:38:01 pm »
I'm working on a set of the barbed broad heads as describbed in the book "hunting the wooden bow". 

He talks about using 3/8" dowels and 3/8" tubing. 

I'm using 5/16" dowels but the question is do I follow the model and use 5/16 od tubing then make a dowel tip resizing tool to recieve the 1" collar of the tubing or go with 3/8" bored to fit 5/15".  The latter will be slightly heavier BUT I'll be able to just slide it over the dowels. 

What do you guys think?

Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: Saxton/Young style broad head decision
« Reply #1 on: July 06, 2014, 03:52:32 pm »
I can't answer your question, but check your local game laws. Barbed heads are not legal in all states
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Saxton/Young style broad head decision
« Reply #2 on: July 07, 2014, 01:19:34 am »
They are here, so are stone.
Logged
Pages: [1]
« previous next »