« previous next »
Pages: [1] 2

Author Topic: A board named Molly  (Read 3630 times)

0 Members and 1 Guest are viewing this topic.

UserNameTaken

  • Guest
A board named Molly
« on: July 02, 2014, 01:33:04 am »
Hi all,

I found a red oak board with some really fat late growth, and I would like to make my first molly out of it. This is my plan, but I worry that this is too narrow or too short--or both.





Those rings are about 1/2 inch thick.
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: A board named Molly
« Reply #1 on: July 02, 2014, 05:00:27 am »
I just finished a red oak molly backed with burlap that is 59 1/4" ntn and 55 @ 26.  I went 2 1/4 and it still took set (due to my inept tillering and it probably just being overs-stressed)  How long is the draw?  I think you're probably good to go, never tried the Z handle though.  Keep us posted
Logged

UserNameTaken

  • Guest
Re: A board named Molly
« Reply #2 on: July 02, 2014, 07:02:15 am »
Peacebow,

How much set did you end up with? My draw is 26".
Logged

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: A board named Molly
« Reply #3 on: July 02, 2014, 08:39:14 am »
I think I would keep the length, but change the ratio between lever and bending limb. Maybe 10" lever and 17" bending limb. Also, I prefer the bending limb to taper slightly. Maybe from 2" down to 1 3/4" or even 1½". It just looks nicer and makes it easier to tiller. Otherwise your design looks fine. I like those fat rings of that oak 8)
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline bushboy

  • Member
  • Posts: 2,256
Re: A board named Molly
« Reply #4 on: July 02, 2014, 10:09:44 am »
 Just make sure to get your tip line up and reduced early on.it translates to a fair bit of weight lost even if the flex just a bit.GL!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: A board named Molly
« Reply #5 on: July 02, 2014, 12:39:53 pm »
Looking forward to seeing what you come up with on this one...  I wound up backing mine with a similar design with silk because I was nervous about the red oak.

OneBow
Logged

UserNameTaken

  • Guest
Re: A board named Molly
« Reply #6 on: July 02, 2014, 02:07:07 pm »
Thanks for the advice guys. I will post some pictures if it works out.

Dark Soul, thanks; I will adjust my design to those dimensions to be on the safe side.
Logged

Offline Wooden Spring

  • Member
  • Posts: 437
Re: A board named Molly
« Reply #7 on: July 02, 2014, 03:16:19 pm »
For what it's worth, I haven't built this EXACT bow yet, but this drawing summarizes all the information that I've gathered on these things. If you build it, lemme know how it turns out.
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: A board named Molly
« Reply #8 on: July 02, 2014, 04:01:24 pm »
I like wooden spring's link, pretty good basics for a modern mollegabet even though the tapered limb strays from the artifact just as much as a Z handle does ;)

That's some crazy oak, keep us updated on how that thing bends!
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,621
  • Sorry Officer, I was just gathering "materials".
Re: A board named Molly
« Reply #9 on: July 02, 2014, 04:15:10 pm »
 8)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Wooden Spring

  • Member
  • Posts: 437
Re: A board named Molly
« Reply #10 on: July 02, 2014, 04:46:00 pm »
Quote from: huisme on July 02, 2014, 04:01:24 pm
I like wooden spring's link, pretty good basics for a modern mollegabet even though the tapered limb strays from the artifact just as much as a Z handle does ;)

That's some crazy oak, keep us updated on how that thing bends!

Hey, that's cool. Like I said I haven't built this configuration yet. For all I know it's going to be more like a cricket bat than a bow...
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline bushboy

  • Member
  • Posts: 2,256
Re: A board named Molly
« Reply #11 on: July 02, 2014, 05:44:05 pm »
Here's one close to that design.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

UserNameTaken

  • Guest
Re: A board named Molly
« Reply #12 on: July 02, 2014, 05:49:22 pm »
Wooden Spring, thanks. I might just give that design a try, because I really like the shape of it.

Huisme, it must have been one happy tree. I've never seen late growth that thick before.
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: A board named Molly
« Reply #13 on: July 02, 2014, 08:11:56 pm »
I can confirm that modified molle design works well; made one for a friend recently, looks a lot like Bushboy's


Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: A board named Molly
« Reply #14 on: July 03, 2014, 12:05:09 am »
I have a 17" working limb and an 8 inch lever, actually  about 1 1/4" of resting set on each limb  I would have tapered the working limb like these guys are saying, would have saved me endlessly removing wood toward the end to open up the outers I think.  Hope it turns out nice, keep us post. :)
Logged
Pages: [1] 2
« previous next »