Author Topic: 80# @28", 51"ntn  (Read 4262 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: 80# @28", 51"ntn
« Reply #15 on: July 03, 2014, 06:56:54 pm »
Tiller looks pretty good while your drawing it, not as good on the tree, and that is a lot of draw length from such a short bow.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 80# @28", 51"ntn
« Reply #16 on: July 03, 2014, 07:35:12 pm »
I'm not expecting it to last probly. Just figured I'd pick it up and see what it weighed. I'm kinda amazed
Nothing ventured nothing gained

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: 80# @28", 51"ntn
« Reply #17 on: July 03, 2014, 08:21:06 pm »
Scary stuff, the bow, the britches, all of it. ;)  Me, I'm to much of a coward to a 51" bow of any weight to 28".
And also afraid if I wore my britches that low my mom would tan my hide. ;D
Seriously though you pulled off a tough one on that bow, I have to admire that kinda skill.
I ain't broke but I'm badly bent.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 80# @28", 51"ntn
« Reply #18 on: July 03, 2014, 09:49:53 pm »
I was a skateboarder for most my life. I sag my pants. I lost a little winter weight and I'm in between belt holes  :'(... Just look at the bow man lol, thanks guys.
Nothing ventured nothing gained