« previous next »
Pages: [1]

Author Topic: finish for a rawhide backing  (Read 2581 times)

0 Members and 1 Guest are viewing this topic.

Offline cailean

  • Member
  • Posts: 26
finish for a rawhide backing
« on: June 28, 2014, 03:31:23 pm »
Hi Folks... Can someone give me a good durable easy finish for the rawhide on the back of a bow the won't de-laminate it...i put it on damp with TB3.
 tyvm in advance.
 
  keep scraping, play safe.

cailean
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: finish for a rawhide backing
« Reply #1 on: June 28, 2014, 03:36:05 pm »
I like any wipe on oil finishes myself. Tung oil and Tru oil both work well. They soak into the rawhide/wood, so no peeling will happen.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline cailean

  • Member
  • Posts: 26
Re: finish for a rawhide backing
« Reply #2 on: June 28, 2014, 03:41:22 pm »
 Thanks PD...is Tung Oil like boiled Linseed Oil as i have LOTS of that but no Tung Oil
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: finish for a rawhide backing
« Reply #3 on: June 28, 2014, 06:03:07 pm »
I use Tru-Oil on all bows, all backings.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: finish for a rawhide backing
« Reply #4 on: June 28, 2014, 06:26:24 pm »
I use tung oil and then paste wax over that, you can dress the rawhide up before you seal it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Weylin

  • Member
  • Posts: 2,296
Re: finish for a rawhide backing
« Reply #5 on: June 29, 2014, 12:45:09 am »
Tru oil for me. works great on rawhide.
Logged

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: finish for a rawhide backing
« Reply #6 on: June 29, 2014, 12:52:44 am »
Another vote for tru-oil.  But tung oil or a wipe on poly would work too.
Logged
Enjoy the hunt!  Mitch
Pages: [1]
« previous next »