« previous next »
Pages: [1] 2

Author Topic: Red oak board bow  (Read 12259 times)

0 Members and 2 Guests are viewing this topic.

Offline Noahnategrace

  • Member
  • Posts: 10
Red oak board bow
« on: June 26, 2014, 12:50:21 am »
My first build, started with a trip to the depot.
« Last Edit: June 26, 2014, 12:54:10 am by Noahnategrace »
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #1 on: June 26, 2014, 01:06:20 am »
Glued up the riser with a cedar space and Made the best layout I could based on grain pattern and made the cuts
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #2 on: June 26, 2014, 01:09:15 am »
Riser
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Red oak board bow
« Reply #3 on: June 26, 2014, 01:30:49 am »
Lookin good, nice piece of RO, that'll look good with the cedar strip too
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #4 on: June 26, 2014, 01:44:33 am »
Lots of forming
Logged

Offline autologus

  • Member
  • Posts: 1,092
Re: Red oak board bow
« Reply #5 on: June 26, 2014, 11:30:16 am »
Looking good, that board should make a nice bow.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #6 on: June 26, 2014, 03:43:54 pm »
Thanks folks, just at a stand still. Not sure if I want to back it, and if so, what with........
I know it's just a pic, but what's your opinion on this grain holding up without a backing?
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #7 on: June 27, 2014, 03:15:58 pm »
I have a hickory backing strip but since this is my first bow I'm thinking I don't want to waste it on this build, maybe I will just try backless....
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Red oak board bow
« Reply #8 on: June 27, 2014, 08:48:12 pm »
Good work playing the grain, sure this ain't your first rodeo?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #9 on: June 28, 2014, 01:15:37 am »
Yea, it's my first but I have watched so many videos and read so many articles I could host a conference!
I just don't have any experience so making critical decisions like whether or not to back it is crippling my progress.
It's ok that I'm paused though, I've learned to enjoy the process no matter if it takes longer than originally expected.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Red oak board bow
« Reply #10 on: June 28, 2014, 11:13:38 am »
Quote from: Noahnategrace on June 28, 2014, 01:15:37 am
making critical decisions like whether or not to back it is crippling my progress.


Yeah, I go thru that myself.  It's called "analysis paralysis".  It happens to me on certain bows, like one I have been working on for over 2 years.  It's windchecked osage with about as much superglue as wood!  At least I can say "ain't blown yet!" because I haven't worked on it enough to really get it far into tiller.  LOL!

I think your grain looks pretty good, I don't think you are taking any huge risk by not backing.  You did a good job laying the bow out on the board to take best advantage  of the grain, now defer to your own best judgement.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #11 on: June 29, 2014, 02:02:49 am »
A little handle work and rough out.decided not to back,....
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Red oak board bow
« Reply #12 on: June 29, 2014, 02:15:43 am »
Got a ways to go, good looking start though, You know those won't fire out of that bow right  :P  I'm assuming this handle is to be super stiff or is the finger groove thing ok on quarter sawn?  I've seen a quarter sawn carved on the back into some massive celtic knottage so maybe.  Either way roll with it man!
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #13 on: June 29, 2014, 10:58:24 am »
Quote from: Peacebow_Coos on June 29, 2014, 02:15:43 am
I'm assuming this handle is to be super stiff or is the finger groove thing ok on quarter sawn?

I was assuming also... I have big hands so it's very thick there. Also since this is my first bow I'm only expecting to learn, hope it doesn't break in my hand :(
Logged

Offline Noahnategrace

  • Member
  • Posts: 10
Re: Red oak board bow
« Reply #14 on: July 01, 2014, 11:18:06 pm »
Tillering is hard work.... I don't know how much to take off just to get it close it's natural relaxed/strung  position.
Logged
Pages: [1] 2
« previous next »