Author Topic: Flight bow in progress  (Read 7433 times)

0 Members and 1 Guest are viewing this topic.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Flight bow in progress
« Reply #30 on: June 20, 2014, 06:01:04 am »
Sounds like it's coming along nicely, and just like any other bow build,always some challenge to contend with as you move along. :) Looking forward to seeing the final results. :)
  Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Flight bow in progress
« Reply #31 on: June 20, 2014, 08:08:47 am »
That's fast at such a short draw Steve. I bet she rips at a full draw!
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight bow in progress
« Reply #32 on: June 20, 2014, 09:02:05 am »
  Chris, bow is not really on the edge of breaking, just on the edge of taking set. I could probably tiller it out to 28" but I would loose a lot of relfex and  some of the snap.

  Allen, glad you chimed in. I was about to make up a bunch of 22" arrows for this bow. I keep forgetting primitve stops at 23'.

  Something I see almost everytime I make a bow using no set tillering is I get just a little bit of forgiveness and healing if I don't go too far. Say I overdraw 1" and it looses a pound or so. When it sits for a few hours the weight comes back and I get another shot at tillering the weight down instead of compressing it down.

   It makes me think of a legal way to cheat at a weigh in just the way boxers do at weigh ins. They sweat off a bunch of weight before a fight to make weight and then over the next 24 hours rehydrate and put on 5 or 6 pounds. A flight bow could be slighlty over drawn for a temporary weight loss to make a weigh in and then set back down for a few hours to heal up. I tries this with my broadhead bow and could bot compress an ounce out of it even with a 3" overdraw. I had to go back and scrape another pound out of it.

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Flight bow in progress
« Reply #33 on: June 20, 2014, 10:56:44 am »
   wow, i am enjoying this,

                   chuck
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight bow in progress
« Reply #34 on: June 20, 2014, 03:17:42 pm »
  Ok, for once everything came out just right.

 I started with 3.5 reflex and finished with 2.25 ( predicted about 2)

stored energy came in at 43.5 @24" draw ( this would exrtapolate out to almost 63# or 105% if drawn to 28")

Chrono speed came in at 248 fps with 200 grain arrow short drawn by 1/2". 245 fps was my goal, I should hit about 253fps)

Efficiency I am most happy about at 53.5% with a 200 grain arrow.

Mass came in at 16.6 predicted was 17.0


  I wiill polish it up a bit and post a series of photos.
« Last Edit: June 20, 2014, 03:21:25 pm by Badger »

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Flight bow in progress
« Reply #35 on: June 20, 2014, 04:08:54 pm »
Yo the man.
I haven't got over 200fps yet  :-[ :'( mind I'm working on something  ;)
Del
Health warning, these posts may contain traces of nut.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Flight bow in progress
« Reply #36 on: June 20, 2014, 04:44:42 pm »
Wow, that knot looks worse than the knot I just fixed in my Hickory backed osage, in a very similar spot too.   The little branches inside the knots were chrysaling.   
Great bow.    What do you think you would get at 10gpp?

Mike.

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight bow in progress
« Reply #37 on: June 20, 2014, 05:00:50 pm »
  I only did one shot and got 181 which I was very pleased with for a 24" draw. Arrow was slightly under 500 at 488. This is my best bow to date that has survived numerous shots and was pretty well worked in when tested. I have another bow set aside for the broadhead shoot drawing 50#@28 and am hitting 189 with it.

  I actually have specific records I am chasing and will build for those records. Doesn't mean I won't enter the bow in other classes as well. This bow will hit about 28 fps faster than the one I currently hold the record with. My broadhead bow should be good enough as well. I need about 228 yards with a 500 grain broadhead. 184 fps will do that under the right conditions.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Flight bow in progress
« Reply #38 on: June 20, 2014, 07:29:26 pm »
That is excellent Steve.  Now put that bow away and save it for the flight shoots

P.S.  I started working, slowly, on a heavy recurve.  I decided to try a selfie
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight bow in progress
« Reply #39 on: June 20, 2014, 08:22:58 pm »
That is excellent Steve.  Now put that bow away and save it for the flight shoots

P.S.  I started working, slowly, on a heavy recurve.  I decided to try a selfie

  How long of a draw are going for Mark?

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Flight bow in progress
« Reply #40 on: June 20, 2014, 08:57:27 pm »
It will be 32"
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Flight bow in progress
« Reply #41 on: June 20, 2014, 09:42:04 pm »
You guys are awesome.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Flight bow in progress
« Reply #42 on: June 21, 2014, 12:08:31 am »
 8)
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr