« previous next »
Pages: [1]

Author Topic: post steaming drying time  (Read 1400 times)

0 Members and 1 Guest are viewing this topic.

Offline Richard B

  • Member
  • Posts: 80
post steaming drying time
« on: June 12, 2014, 12:07:23 pm »
A few days ago I steamed the handle section of my elm bow (work in progress - see "elm stave" post) to bring the string back into alignment with the handle. Was wondering how long I should leave it before re-commencing the tillering process, to make sure it is fully dried out and wont give me unnecessary string follow.
The handle areas is about 1.6 x 1.2 inches as the moment and was steamed for about 45mins.
Logged

Offline RBLusthaus

  • Member
  • Posts: 753
Re: post steaming drying time
« Reply #1 on: June 12, 2014, 12:09:38 pm »
Actually, you wait for the area to rehydrate to equilibrium, as the steaming process forces moisture out of the wood.  I wait a day or two and then have at it. 
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,613
Re: post steaming drying time
« Reply #2 on: June 12, 2014, 12:11:02 pm »
2x
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: post steaming drying time
« Reply #3 on: June 12, 2014, 12:46:20 pm »
I wait 2-3 days to be safe
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: post steaming drying time
« Reply #4 on: June 12, 2014, 12:48:03 pm »
Just depends how wet the wood was when I steamed it. If the wood was dry I wait about 3 days.
Logged

Offline Richard B

  • Member
  • Posts: 80
Re: post steaming drying time
« Reply #5 on: June 12, 2014, 02:55:08 pm »
many thanks. The wood got quite wet when I steamed it. But its been very hot here (for England!). I think I will give it 4 days.
Logged
Pages: [1]
« previous next »