« previous next »
Pages: [1]

Author Topic: Steam bending laminated bow wood using Smooth-On EA 40 epoxy  (Read 2507 times)

0 Members and 1 Guest are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Steam bending laminated bow wood using Smooth-On EA 40 epoxy
« on: May 22, 2014, 03:25:56 pm »
Has anyone used heated steam bending for laminated bow woods which have Smooth-On EA 40 epoxy as the glue holding the pieces together?
Does it work?? or will the Epoxy separate from the wood?
Logged

Don Case

  • Guest
Re: Steam bending laminated bow wood using Smooth-On EA 40 epoxy
« Reply #1 on: May 22, 2014, 03:56:42 pm »
Go here  http://www.smooth-on.com/Epoxy,-Silicone-an/c11_1125_1179/index.html

About halfway down the page is a button "Technical bulletin" Push It. In there it says that the heat distortion temperature is 173 degrees depending on how you mixed and cured the epoxy. I think steaming would make it fail. Epoxies also have a thing called "glass transition temperature". You might want to Google that.
Logged
Pages: [1]
« previous next »