« previous next »
Pages: [1]

Author Topic: Reuse sinew?  (Read 1284 times)

0 Members and 1 Guest are viewing this topic.

Offline wizardgoat

  • Member
  • Posts: 2,397
Reuse sinew?
« on: May 06, 2014, 02:16:19 am »
I have an Osage bow with a really ugly sinew job on it. I'd like to remove the sinew, and use it on another project.
Can I soak it in a warm bath, rinse it out and re use it? It all makes sense in my head, thought I'd hit you guys up to see if there's a method, or just a bad idea.
I assume it wouldn't take long for the sinew to come off, but will I have to season the Osage for a while, or would I risk ruining it?
Thanks
Logged

mikekeswick

  • Guest
Re: Reuse sinew?
« Reply #1 on: May 06, 2014, 02:54:04 am »
You won't  ruin the wood and yes just soak it in a bath. Then use the patience of Job to get it all bundled up again ready to use  ;)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Reuse sinew?
« Reply #2 on: May 06, 2014, 09:01:30 am »
As long as there is no finish over the sinew you can soak it off and reuse it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Reuse sinew?
« Reply #3 on: May 06, 2014, 02:41:42 pm »
Great, thanks guys
Logged

Offline Wiley

  • Member
  • Posts: 182
Re: Reuse sinew?
« Reply #4 on: May 06, 2014, 03:06:30 pm »
This is the best way I've seen sinew applied. It's clear and concise, in the process of getting it smooth you are squeezing a lot of extra glue which lowers mass. Lower mass = better. It looks great.
http://www.primitivearcher.com/smf/index.php?topic=43246.0
Logged
Pages: [1]
« previous next »