Author Topic: Japanese ligustrum...or Japanese Privet  (Read 4729 times)

0 Members and 1 Guest are viewing this topic.

Offline redboard

  • Member
  • Posts: 40
Re: Japanese ligustrum...or Japanese Privet
« Reply #15 on: April 14, 2014, 03:55:47 pm »
I'll get a pic tonight...it'll still be just a tree though. I had a 104 degree fever most of the weekend.

Offline redboard

  • Member
  • Posts: 40
Re: Japanese ligustrum...or Japanese Privet
« Reply #16 on: April 16, 2014, 01:26:14 pm »
Here are the two best chunks of ligustrum off of my axe-therapy session

Offline redboard

  • Member
  • Posts: 40
Re: Japanese ligustrum...or Japanese Privet
« Reply #17 on: April 24, 2014, 01:03:20 pm »
So, I've roughed out the smaller one. It has kind of a natural reflex that I'll use for the back.
I may have made a mistake in debarking it, but I've got plenty more if it checks too badly. Its measuring about 75" and will  certainly be a "character" bow. I'll leave the limbs as wide as I can and focus on tillering the belly.
This stuff is super springy and tough to break when its semi-dry. I'm hoping it'll be just as tough when it's all the way dry!

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: Japanese ligustrum...or Japanese Privet
« Reply #18 on: April 24, 2014, 04:43:17 pm »
I got a privite stave i cut 6 months ago so i'll wait and see how yours goes before i try...,they make fighting staffs and spears out of it in china because it is supposed to be very tough flexible and whippy , so should make a good bow
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline bubby

  • Member
  • Posts: 11,054
Re: Japanese ligustrum...or Japanese Privet
« Reply #19 on: April 24, 2014, 05:24:08 pm »
privet does make a good bow and dries pretty fast so watch for checks
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹