« previous next »
Pages: [1]

Author Topic: Tip/back violations  (Read 1243 times)

0 Members and 2 Guests are viewing this topic.

Don Case

  • Guest
Tip/back violations
« on: April 16, 2014, 11:18:52 pm »
I'm shaping the tips and in order to get a nice blend and shape from bow to tip it would be nice to sand and shape the back in the last inch or so. Can I get away with that?
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Tip/back violations
« Reply #1 on: April 16, 2014, 11:20:57 pm »
Not exactly following you. Pic would be great.
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Tip/back violations
« Reply #2 on: April 16, 2014, 11:21:39 pm »
Quote from: adb on April 16, 2014, 11:20:57 pm
Not exactly following you. Pic would be great.

+2
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Don Case

  • Guest
Re: Tip/back violations
« Reply #3 on: April 16, 2014, 11:34:58 pm »
You can see the join has an oblong shape because the bow is thicker on one side(arrow). What I would like to do is thin the bow enough so the tip has an even oval shape.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tip/back violations
« Reply #4 on: April 17, 2014, 12:58:43 am »
Pre-shape the trailing end of the overlay before gluing it down. 
 You can work that down without much violation with a chainsaw file working only on the overlay.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »