« previous next »
Pages: [1]

Author Topic: Thumb slap question  (Read 4136 times)

0 Members and 1 Guest are viewing this topic.

Offline Boatriga

  • Member
  • Posts: 8
Thumb slap question
« on: April 05, 2014, 06:36:29 pm »
I just got a new selfbow, shot it today and was getting slapped on the base of the thumb, didnt have my guard, but not sure if that would have helped seeing that it was hitting the joint where the thumb meets the wrist...any thoughts?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thumb slap question
« Reply #1 on: April 05, 2014, 07:10:35 pm »
How high is the brace height? Can you post a pic of the bow at brace?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 4dog

  • Member
  • Posts: 1,610
Re: Thumb slap question
« Reply #2 on: April 05, 2014, 10:21:31 pm »
sure sounds like a loose string.
Logged
"SET" is always there !!!

Offline Boatriga

  • Member
  • Posts: 8
Re: Thumb slap question
« Reply #3 on: April 06, 2014, 05:41:35 pm »
This help?
Logged

Offline 4dog

  • Member
  • Posts: 1,610
Re: Thumb slap question
« Reply #4 on: April 06, 2014, 05:50:51 pm »
turn your hand a bit to the left so your thumbknuckle is center of the bow....gonna be hard to hold hold if its a heavy weight bow....how is string tracking?
Logged
"SET" is always there !!!

Offline 4dog

  • Member
  • Posts: 1,610
Re: Thumb slap question
« Reply #5 on: April 06, 2014, 05:52:31 pm »
also measure your brace height.
Logged
"SET" is always there !!!

Offline Boatriga

  • Member
  • Posts: 8
Re: Thumb slap question
« Reply #6 on: April 06, 2014, 06:24:37 pm »
Brace height is 3.5"
String tracking seems fine
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thumb slap question
« Reply #7 on: April 06, 2014, 06:51:02 pm »
Raise the brace height to about 6" and try it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Traxx

  • Member
  • Posts: 1,018
Re: Thumb slap question
« Reply #8 on: April 06, 2014, 07:04:55 pm »
yup,
Raise the BH.
Logged

Offline Boatriga

  • Member
  • Posts: 8
Re: Thumb slap question
« Reply #9 on: April 06, 2014, 08:06:16 pm »
Raise the brace height by making the string shorter?
Logged

Offline Traxx

  • Member
  • Posts: 1,018
Re: Thumb slap question
« Reply #10 on: April 06, 2014, 09:32:11 pm »
yes.
twist the string,in the right direction to shorten it.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Thumb slap question
« Reply #11 on: April 06, 2014, 10:02:21 pm »
Does your string have a loop on both ends or a bowyers knot on the bottom?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 4dog

  • Member
  • Posts: 1,610
Re: Thumb slap question
« Reply #12 on: April 06, 2014, 10:16:13 pm »
ahhhh theres the rub...er slap...brace height
Logged
"SET" is always there !!!

Offline Boatriga

  • Member
  • Posts: 8
Re: Thumb slap question
« Reply #13 on: April 06, 2014, 10:18:18 pm »
Thanks y'all! Moved it to 5"...no slappy
Logged
Pages: [1]
« previous next »