« previous next »
Pages: [1]

Author Topic: Carrara glass blade  (Read 2302 times)

0 Members and 1 Guest are viewing this topic.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Carrara glass blade
« on: March 24, 2014, 06:03:52 pm »
Needed a little change up :o I got a pc of carrara glass from Hickory Bill so I cut a pc off an came up with this nice 4"+ knife blade, managed to get a corner notch also out of a scrap pc of Georgetown. thanks for lookin, Bob
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Carrara glass blade
« Reply #1 on: March 24, 2014, 06:33:38 pm »
ooooo thats pretty
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Carrara glass blade
« Reply #2 on: March 24, 2014, 07:44:55 pm »
That's a good one. What is Carrara glass. I think I have some that look's just like that.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Carrara glass blade
« Reply #3 on: March 24, 2014, 08:21:37 pm »
Eddie, Carrara glass was used on old store fronts or old time ice cream parlors. The old white glass counters where you could get a real cherry coke, Your probably to young to remeber them. It is just glass tile, some has a rough back for the glue to adhere too. About 3/8" thick. I'll see if Hickory Bill will bring a few to the classic. Sure as heck is better to knap than some old toilet tank >:( I hate thunder chert.   :D Bob
Logged

Offline Zuma

  • Member
  • Posts: 4,324
Re: Carrara glass blade
« Reply #4 on: March 24, 2014, 09:24:51 pm »
Nice points Bob,
Here is some tile porcelain from the Trade Towers in lower Manhattan.
Dredged up and transported to NJ for fill.
About 3/4 inch stuff.
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Carrara glass blade
« Reply #5 on: March 24, 2014, 09:29:52 pm »
Nice looking points guys.
Logged

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Carrara glass blade
« Reply #6 on: March 24, 2014, 11:15:29 pm »
Zuma, what a unique find,points look real good, Bob
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Carrara glass blade
« Reply #7 on: March 25, 2014, 11:14:26 am »
Bob; Used to love those cherry, chocalate, and vanilla cokes ;D. That's the same stuff I have in green, black,tan and white.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Mohawk13

  • Member
  • Posts: 402
Re: Carrara glass blade
« Reply #8 on: March 28, 2014, 12:47:38 am »
Nice work..I have a nice piece-of Elk antler that would look just dynamite hafted in...Nice points Zuma
Logged
He That Raises the sword against us, Shall be cleaved upon seven fold-Talmud.

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: Carrara glass blade
« Reply #9 on: April 02, 2014, 03:21:43 am »
Nice work Bob and Zuma..where about in NJ are u?..I used to be near Hackensack but moved back up near orange county NY...



Russ
Logged
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill
Pages: [1]
« previous next »