Author Topic: pipes  (Read 3895 times)

0 Members and 1 Guest are viewing this topic.

Offline Kullas

  • Member
  • Posts: 33
pipes
« on: March 08, 2014, 11:38:06 pm »
here is a couple of pipes i made if anyone likes that sort of thing. I used to smoke but have given it up. But i still make a few now and then
http://s1265.photobucket.com/user/kullas/library/pipes?sort=3&page=1

Offline zenmonkeyman

  • Member
  • Posts: 482
Re: pipes
« Reply #1 on: March 08, 2014, 11:53:06 pm »
Very cool! Are they fired porcelain? What's the process for making them?
If the ppl ever allow private banks to control their currency, 1st by inflation, then by deflation, the banks & corporations that will grow up around (these banks) will deprive the ppl of all property until their children wake up homeless on the continent their fathers conquered. Thomas Jefferson

Offline Kullas

  • Member
  • Posts: 33
Re: pipes
« Reply #2 on: March 09, 2014, 10:09:08 pm »
They are fired food safe earth clay. I hand form the tubes and bowl allow to half dry amd sand to a smother finish and burnish to a shine then fire.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: pipes
« Reply #3 on: March 09, 2014, 10:44:33 pm »
Very nice.

Offline Kullas

  • Member
  • Posts: 33
Re: pipes
« Reply #4 on: March 09, 2014, 10:47:21 pm »
Thank you

Offline Scallorn

  • Member
  • Posts: 182
Re: pipes
« Reply #5 on: March 11, 2014, 10:04:13 pm »
Very cool! Not allot of people make that kind of thing. I like clay pipes, but I never have made one. All of my pipes are made of hardwoods like hickory and some fruit trees.

Offline Kullas

  • Member
  • Posts: 33
Re: pipes
« Reply #6 on: March 12, 2014, 01:40:39 pm »
Good looking pipe there. I havent made a lot of wood pipes because its hard for me to make the stems and i refuse to buy them  :D

Offline Scallorn

  • Member
  • Posts: 182
Re: pipes
« Reply #7 on: March 12, 2014, 05:24:45 pm »
The stems are a hard thing to get right. Use hardwood stems with a pith in the center, I use viburnum species. Then take a hot wire and push or drill it through the center to hollow it out. You can also use cane or reed stems, they are naturally hollow.