« previous next »
Pages: [1]

Author Topic: bow finishes?  (Read 1739 times)

0 Members and 1 Guest are viewing this topic.

Offline bushboy

  • Member
  • Posts: 2,256
bow finishes?
« on: March 09, 2014, 08:31:18 pm »
Hello all,what I can gather from a search is most are made from a mixture of boiled linseed oil,oil based varnish and turpentine.wondering if anyone mixes their own and what proportions are used?thx's!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline DavidV

  • Member
  • Posts: 472
Re: bow finishes?
« Reply #1 on: March 09, 2014, 08:47:40 pm »
I've used 1 part boiled linseed oil, 1 part polyurethane, and 1 part denatured alcohol I beleive .
Logged
Springfield, MO

Offline Tom Kurth

  • Member
  • Posts: 29
Re: bow finishes?
« Reply #2 on: March 09, 2014, 09:29:18 pm »
A typical home-made wiping varnish will use one part drying oil such as boiled linseed oil, one part of some sort of resin based finish like polyurethane, and one part thinner, either mineral spirits or turpentine. To my knowledge, denatured alcohol would not be appropriate as it is not a thinner for either the oil or the varnish. Denatured alcohol is usually the thinner/cleaner/base for shellac.

Best,
Tom
Logged
Best,
Tom

Escape to Missouri

Offline DavidV

  • Member
  • Posts: 472
Re: bow finishes?
« Reply #3 on: March 09, 2014, 09:51:35 pm »
Tom, you're right it's been a while since I've used it.
Logged
Springfield, MO

mikekeswick

  • Guest
Re: bow finishes?
« Reply #4 on: March 10, 2014, 04:06:42 am »
Tung oil and linseed oil is a great mix. Add either white spirit or turps to the first coat or two.
Logged
Pages: [1]
« previous next »