« previous next »
Pages: 1 [2]

Author Topic: rosewood?  (Read 4926 times)

0 Members and 1 Guest are viewing this topic.

mikekeswick

  • Guest
Re: rosewood?
« Reply #15 on: February 21, 2014, 04:20:18 am »
If you aren't 100% certain of your glue-up methods go with some plentiful wood to get it dialled.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: rosewood?
« Reply #16 on: February 21, 2014, 09:24:18 am »
The one thing about Rosewood and/or Pau Ferro is that it is a bit weak in tension so you have to be careful when adding reflex on glue-up, too much and she goes bang.

I do have a picture someplace but I'll have to look for it
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bushboy

  • Member
  • Posts: 2,256
Re: rosewood?
« Reply #17 on: February 22, 2014, 09:50:12 am »
Here's a look at panama rosewood that I got.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline BrokenArrow

  • Member
  • Posts: 168
Re: rosewood?
« Reply #18 on: March 06, 2014, 08:58:18 pm »
Not honduran or yucatan rosewood unless u can deal .with compression cracks:(
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: rosewood?
« Reply #19 on: March 06, 2014, 09:46:49 pm »
Hey, anybody ever mess with chechen? My local woodcraft has a lot, and it seems to be a 1000 times cheaper than rosewood, with similar looks.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline lostarrow

  • Member
  • Posts: 1,348
Re: rosewood?
« Reply #20 on: March 07, 2014, 12:43:32 am »
Only in the veneer form for furniture and inlays , etc. Seemed very hard ,brittle  and split easily. Beautiful stuff  when finished up. I've only seen highly figured ,so I don't know if this would be indicative of the grain on most.
Logged
Pages: 1 [2]
« previous next »