« previous next »
Pages: [1]

Author Topic: ERC questions  (Read 2938 times)

0 Members and 1 Guest are viewing this topic.

Offline Almostpighunter

  • Member
  • Posts: 421
ERC questions
« on: March 07, 2014, 03:39:22 pm »
I have some beautiful ERC staves and am excited to get started on them, but my couple of earlier tries ended badly, i think, because I am not used to the wood. They have a sapwood and hardwood layer, several knots and a lot of wood to work with. My questions are:

If backing with rawhide, how crucial is finding a single growth ring in the sapwood (The rings are REALLY small)?

Is there a better bow design for this type of wood over another (Flatbow vs. rounded belly)?

Should this bow be kept longer or the limbs wider to help distribute the forces over a greater area?

Any other helpful hints about working with this kind of wood would be greatly appreciated.

Thanks in advance guys!!!
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: ERC questions
« Reply #1 on: March 07, 2014, 05:24:35 pm »
I've had good luck with maple backed erc, haven't tried rawhide though.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline 4dog

  • Member
  • Posts: 1,610
Re: ERC questions
« Reply #2 on: March 07, 2014, 06:20:41 pm »
watching.   ;D
Logged
"SET" is always there !!!

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: ERC questions
« Reply #3 on: March 07, 2014, 07:04:30 pm »
Quote from: 4dog on March 07, 2014, 06:20:41 pm
watching.   ;D
+1 on the watching...

I have a bunch of Quartersawn ERC that I hope to back with good tension woods and see what I can make of it...

OneBow

 
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: ERC questions
« Reply #4 on: March 07, 2014, 07:11:09 pm »
as far as erc selfbow i'd talk to gundoc, he posted a knarly one last year
« Last Edit: March 07, 2014, 08:12:17 pm by bubby »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: ERC questions
« Reply #5 on: March 07, 2014, 08:01:57 pm »
The one successful erc I made...

62" - parallel limbs to mid limb (1.75") mostly sapwood with a sliver of heartwood on the rounded belly.  Stiff handle and sinew backed. It is a pretty nice shooting bow. 
Logged
Enjoy the hunt!  Mitch

Offline Almostpighunter

  • Member
  • Posts: 421
Re: ERC questions
« Reply #6 on: March 08, 2014, 02:24:09 am »
Thanks for the input so far :)

Okay, I've searched the older posts for a bit and there seems to be a mixed impression of sapwood vs. heartwood. My ever changing brain is thinking to make a self bow now. Is that even possible with ERC? Looks like most of the bows I could find are sinew backed sapwood.

Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: ERC questions
« Reply #7 on: March 08, 2014, 02:35:00 am »
« Last Edit: March 08, 2014, 01:56:31 pm by bubby »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »