« previous next »
Pages: [1]

Author Topic: Black Locust Sapling Bow  (Read 3524 times)

0 Members and 1 Guest are viewing this topic.

Offline bowa

  • Member
  • Posts: 15
Black Locust Sapling Bow
« on: March 03, 2014, 02:24:13 am »
Hi,

this is my Sapling Competiotion Bow.

The first bow i made for this Competion was borken after teh finish :o



This here was Plan B ::)

length 160cm
width Fadeouts 40 mm to 10 at the tips
38#@28"
handle and Tipoverlays from laburnum
Finish schellac

The lower limb is to stiff but if I had corrected it this bow would have become too weak.
In addition, there are many branches O:) ::)















Logged
Nine out of ten voices in my head say I'm not crazy. The tenth hums the melody of Tetris.

Offline Hrothgar

  • Member
  • Posts: 1,478
Re: Black Locust Sapling Bow
« Reply #1 on: March 03, 2014, 07:28:40 am »
You had quite a challenge there. Bow turned out nice. Sometimes limb thickness and tiller profile don't seem to correlate. Looks good.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline osage outlaw

  • Member
  • Posts: 11,964
Re: Black Locust Sapling Bow
« Reply #2 on: March 03, 2014, 09:11:00 am »
Nice bow!
Logged
I started out with nothin' and I still got most of it left

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Black Locust Sapling Bow
« Reply #3 on: March 03, 2014, 09:39:19 am »
You're right about the lower limb, could have bent more in the outer limb. all things considered it's still a good looking bow from a tricky stave. Well done ;D
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Black Locust Sapling Bow
« Reply #4 on: March 03, 2014, 09:43:21 am »
Very nice job on a challenging stave. Looks great! Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline DuBois

  • Member
  • Posts: 2,020
Re: Black Locust Sapling Bow
« Reply #5 on: March 03, 2014, 11:51:43 am »
Looks good all things considered ;)
Did You use the outer sapwood for the back?
Logged

Offline bowa

  • Member
  • Posts: 15
Re: Black Locust Sapling Bow
« Reply #6 on: March 03, 2014, 01:43:12 pm »
Yes, i did.
It was a Sapling Bow Competition from the German Bowyer Community.
Within 6 Weeks you have to build a bow from a Sapling maximum diameter 12 cm. At least 30#@28" an no Backings except linen or silk or something like that. No Bamboo, Fibrechannel or other "hard Backings" ;)
Logged
Nine out of ten voices in my head say I'm not crazy. The tenth hums the melody of Tetris.

Offline Josh B

  • Member
  • Posts: 3,741
Re: Black Locust Sapling Bow
« Reply #7 on: March 03, 2014, 02:56:52 pm »
Pretty cool bow!  Considering your hinge is close to the fade, it wouldn't take much to correct it.  I doubt that you would lose more than a pound or two.  A sapling competition sounds like a cool idea!  Josh
Logged

Offline DuBois

  • Member
  • Posts: 2,020
Re: Black Locust Sapling Bow
« Reply #8 on: March 03, 2014, 08:50:18 pm »
Great! I have a BL sapling with the bark off and roughed out and I just keep looking at it and wondering if I will do something with it. I guess I will try it for sure after seeing yours  ;D
Thanks, Marco
Logged

Offline bowa

  • Member
  • Posts: 15
Re: Black Locust Sapling Bow
« Reply #9 on: March 04, 2014, 02:56:48 am »
This is the sapling


chopped down in the heart of Cologne.

payed with blood:)
http://fletchers-corner.de/download/file.php?id=59202&mode=view
Logged
Nine out of ten voices in my head say I'm not crazy. The tenth hums the melody of Tetris.
Pages: [1]
« previous next »