« previous next »
Pages: [1]

Author Topic: Fletching tapered shafts  (Read 2686 times)

0 Members and 1 Guest are viewing this topic.

UserNameTaken

  • Guest
Fletching tapered shafts
« on: March 05, 2014, 11:28:21 pm »
Do fletching jigs work with tapered shafts? I've never used one, so I have no idea.
Logged

Offline Mohawk13

  • Member
  • Posts: 402
Re: Fletching tapered shafts
« Reply #1 on: March 05, 2014, 11:31:04 pm »
Yes they do. You may have to use rubber bands to hold the clamp down on the ends. I use an old Eastern Fletching jig to do my tapered shafts, and use the rubber bands. Takes a bit more time, but in the end works great..
Logged
He That Raises the sword against us, Shall be cleaved upon seven fold-Talmud.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Fletching tapered shafts
« Reply #2 on: March 05, 2014, 11:32:55 pm »
My JoJan Multifletch works fine on tapered shafts. 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

UserNameTaken

  • Guest
Re: Fletching tapered shafts
« Reply #3 on: March 05, 2014, 11:40:25 pm »
Thanks, I won't worry about it then. Now I just have to decide on which jig to buy.
Logged

Offline medicinewheel

  • Member
  • Posts: 3,627
Re: Fletching tapered shafts
« Reply #4 on: March 06, 2014, 09:23:17 am »
Quote from: Pat B on March 05, 2014, 11:32:55 pm
My JoJan Multifletch works fine on tapered shafts.

Yes, no problem with the JoJan.
Logged
Frank from Germany...
Pages: [1]
« previous next »